Engine removal
24 July 2003, 09:54 AM
#2
Scooby Regular
Join Date: May 2003
Posts: 2,031
Likes: 0
Received 0 Likes
on
0 Posts
Good luck,
Make sure you have a gasket set for the engine and exhaust system
1. Undo intercooler,
2. Drain oil
3. drain washer fluid & rad
3A. Remove nuts from clutch housing may have to remove downpipe for ease
4. Remove all nuts & bolts
5. Trolley jack under gearbox raise it up to help with engine removal
6. Engine out
Make sure you have a gasket set for the engine and exhaust system
1. Undo intercooler,
2. Drain oil
3. drain washer fluid & rad
3A. Remove nuts from clutch housing may have to remove downpipe for ease
4. Remove all nuts & bolts
5. Trolley jack under gearbox raise it up to help with engine removal
6. Engine out
24 July 2003, 10:22 AM
#4
Scooby Regular
Thread Starter
Join Date: Dec 2002
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
Well the inlet manifold is already off, exhaust system is completely removed, oil is dranied, think i got an exhaust gasket off david when i had his turbo.
So on with the show then.....
So on with the show then.....
Thread
Thread Starter
Forum
Replies
Last Post