Hks Hyer fitting - Help
#1
Scooby Regular
Thread Starter
Join Date: Mar 2003
Location: GB270
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Ok I will start this thread by saying I am not mechanically minded!
Right - I've gone and bought a 2 year old HKS hyper mid and rear exhaust off a nice chap with a MY00 (same reg year as mine)
Now his was fitted on a Magnex downpipe. I have a completely standard system on mine and would prefer to fit the mid and rear to the standard downpipe (due to cash flow)
I've looked under the car and it appears the gasket on the base of the downpipe is one of those metal O rings. The HKS has a flat mounting plate on the mid pipe. Am I right in thinking I will need a flat 'paper' gasket to replace this one? and will I also need another for the mid to back box? Where can I get one?
Are there any other issues I need to look at before trying this?
Thanks people!!!
Right - I've gone and bought a 2 year old HKS hyper mid and rear exhaust off a nice chap with a MY00 (same reg year as mine)
Now his was fitted on a Magnex downpipe. I have a completely standard system on mine and would prefer to fit the mid and rear to the standard downpipe (due to cash flow)
I've looked under the car and it appears the gasket on the base of the downpipe is one of those metal O rings. The HKS has a flat mounting plate on the mid pipe. Am I right in thinking I will need a flat 'paper' gasket to replace this one? and will I also need another for the mid to back box? Where can I get one?
Are there any other issues I need to look at before trying this?
Thanks people!!!
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
blockhead
Subaru Parts
19
07 November 2015 11:50 PM
charlesr
Engine Management and ECU Remapping
7
26 September 2015 10:46 AM