Prodrive Backbox to what Centre?
#1
Scooby Regular
Thread Starter
Join Date: Feb 2005
Location: South Bucks
Posts: 17,732
Likes: 0
Received 0 Likes
on
0 Posts
Am buying an unwanted PPP backbox from an '01 or '02 model year for my '03 WRX (which I understand fits) but looking underneath the car the centre section has another box in it before it gets to the cats which must be highly restrictive. I want a bit more gas flow and noise (but not too much and certainly no boom), but I am going to leave the cats in place!
- Can anyone tell me who's centre section will mate between standard front section and the PPP backbox?
- Can anyone tell me who's centre section will mate between standard front section and the PPP backbox?
#6
This Hayward & Scott also looks like it will do the job. I have emailed them to get the price and check if it is a 2.5" bore.
G.
G.
#7
Dont know if this helps.
I have a tsl firestorm on my sti8 and it fits fine with the section infront. The section infront of the back box is a shorter length to the my02 model. I had that section, off a my02, cut down by 5" or so to fit!. Works a treat.
Hope this helps.
Ady
[Edited by Adyh1cut - 7/8/2003 5:44:16 PM]
I have a tsl firestorm on my sti8 and it fits fine with the section infront. The section infront of the back box is a shorter length to the my02 model. I had that section, off a my02, cut down by 5" or so to fit!. Works a treat.
Hope this helps.
Ady
[Edited by Adyh1cut - 7/8/2003 5:44:16 PM]
Trending Topics
#8
Hayward & Scott (link above) have confirmed that their centre section has a 2.5" bore and will fit a Prodrive backbox. Cost is £90. Time to get out the ol' cheque book me thinks.
G.
[Edited by GaryCat - 7/9/2003 9:46:46 PM]
G.
[Edited by GaryCat - 7/9/2003 9:46:46 PM]
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM