compressor surge+boostcreep TD05
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Nov 2000
Location: Norup, Denmark
Posts: 936
Likes: 0
Received 0 Likes
on
0 Posts
Hi All,
I would really like to know if any of You who has installed a TD05 get this.
I get really bad compressor surge in 5th at 3700-4100rpm,with a dawes device ,this happens at 1,35 bar,and then when i get to around 5000rpm i get boostcreep to 1,5bar......
On my last VF-29 i ported the wastegate ,as i had the same problem on this one.(that helped with the boostcreep)
My Q is does porting the wastegate also help with the compressor surge, or do i need to bring the boost on slower?????
Thanks
Skassa
I would really like to know if any of You who has installed a TD05 get this.
I get really bad compressor surge in 5th at 3700-4100rpm,with a dawes device ,this happens at 1,35 bar,and then when i get to around 5000rpm i get boostcreep to 1,5bar......
On my last VF-29 i ported the wastegate ,as i had the same problem on this one.(that helped with the boostcreep)
My Q is does porting the wastegate also help with the compressor surge, or do i need to bring the boost on slower?????
Thanks
Skassa
#2
Scooby Regular
Join Date: Nov 2000
Location: 32 cylinders and many cats
Posts: 18,658
Likes: 0
Received 1 Like
on
1 Post
You need to bring the boost on slower in higher gears - the exhaust side is able to spool the turbo earlier than the compressor can cope with. Porting the wastegate will help the creep not the surge.
#3
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Nov 2000
Location: Norup, Denmark
Posts: 936
Likes: 0
Received 0 Likes
on
0 Posts
Okay,Thanks
That meens that i canīt use the dawes device i just purchased....
Iīm glad that the link controls the boost okay ,just a bit slower in spool up....but thatīs apperently what it has to do......
First i thought that it was just holding a much higher boost in 4th/5th gear,but that was boostcreep.
JB,
Have you ported the wastegate on the TD05,to get it to flow enough to ceep the boost down???
Thanks,
Skassa
That meens that i canīt use the dawes device i just purchased....
Iīm glad that the link controls the boost okay ,just a bit slower in spool up....but thatīs apperently what it has to do......
First i thought that it was just holding a much higher boost in 4th/5th gear,but that was boostcreep.
JB,
Have you ported the wastegate on the TD05,to get it to flow enough to ceep the boost down???
Thanks,
Skassa
#4
Scooby Regular
Join Date: Nov 2000
Location: 32 cylinders and many cats
Posts: 18,658
Likes: 0
Received 1 Like
on
1 Post
I didn't port it on the TD05 but did with the TD06 plus a turbine clip. Depends really on the downpipe. Neither my Magnex twin dump nor my Revolution 3" have boost crept on either turbo but others have on other cars.
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM