Slight Metallic Paste on Gearbox Plug !!!
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Apr 2002
Posts: 2,808
Likes: 0
Received 0 Likes
on
0 Posts
Changed the Gearbox oil lastnight & found there to be a little metallic Paste stuck to the Gearbox plug, Should i be worried, There was no large particles. Also found a Biscity substance in the drip tray, Oh **** so thats where the end of my Boost Bar went
Oh yes replaced with GL5 75/90 Synthetic blend Stuff
Cheers Dean
Oh yes replaced with GL5 75/90 Synthetic blend Stuff
Cheers Dean
#5
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Apr 2002
Posts: 2,808
Likes: 0
Received 0 Likes
on
0 Posts
Cheers Folks.
John.
I have wiped it off & never took a picture, But i will keep you posted, By no means am i running as much power as you (281.4 last R&R. Have to mention the .4 as its nearer to 282 than 281)
Reason i changed it was that 2nd was tight on cold mornings. But if third goes south shortly you were right.
Cheers
Dean
John.
I have wiped it off & never took a picture, But i will keep you posted, By no means am i running as much power as you (281.4 last R&R. Have to mention the .4 as its nearer to 282 than 281)
Reason i changed it was that 2nd was tight on cold mornings. But if third goes south shortly you were right.
Cheers
Dean
#6
Taking the box off at the weekend to replace the clutch.. will be drainng box and will try and remember to take a picture of the swarf / bits etc.. currently 124500miles on the clock..
JGM
JGM
Thread
Thread Starter
Forum
Replies
Last Post