Notices
Drivetrain Gearbox, Diffs & Driveshafts etc

How much oil...

Thread Tools
 
Search this Thread
 
Old 20 April 2003, 08:45 PM
  #1  
JayFive
Scooby Newbie
Thread Starter
 
JayFive's Avatar
 
Join Date: Feb 2003
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Unhappy

After washing the car this afternoon, I popped the bonnet up to check on the fluid levels and found that the oil level was well below the minimum infact it barely wetted the end of the dipstick
Question is how much oil does a MY01 with PPP use ?, as it was serviced only 5700 miles ago, its got Es$o Ultron in it,

How much oil will take it from below the L to H on the dipstick,

Sorry for all the questions - just a bit concerned now


JayFive
Old 20 April 2003, 10:12 PM
  #2  
LB4
Scooby Regular
 
LB4's Avatar
 
Join Date: Oct 2002
Posts: 433
Likes: 0
Received 0 Likes on 0 Posts
Post

It shouldn't be using any .... top it up back to in between the min and max marks ... then check weekly, its most likely whoever carried out the oil change didn't fill it correctly.
Old 21 April 2003, 10:50 AM
  #3  
sparkster
Scooby Regular
 
sparkster's Avatar
 
Join Date: Mar 2003
Posts: 427
Likes: 0
Received 0 Likes on 0 Posts
Thumbs up

Remember to check the dipstick on flat ground having run the engine for a couple of mins just to warm the engine very slightly. You may find that you dont have to top it up that much
Old 21 April 2003, 05:42 PM
  #4  
JayFive
Scooby Newbie
Thread Starter
 
JayFive's Avatar
 
Join Date: Feb 2003
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Talking

It took just under 1 litre of Es$o's finest Ultron to get it back up to the 'H' mark

Will check levels again next w/e


JayFive
Old 22 April 2003, 11:59 AM
  #5  
Jay m A
Scooby Regular
iTrader: (2)
 
Jay m A's Avatar
 
Join Date: May 2000
Location: Class record holder at Pembrey Llandow Goodwood MIRA Hethel Blyton Curborough Lydden and Snetterton
Posts: 8,626
Likes: 0
Received 0 Likes on 0 Posts
Post

Jay

With the car cold, with the engine off long enough to let all the oil drain into the sump, on level ground it should read half way between low and high.

Do not be tempted to overfill it, oil can get into the boost control solonoid which will then need cleaning out. You should be OK filling it to the high mark, but next time IMO for best results don't go over halfway.

Justin
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Rbon91
ScoobyNet General
3
19 May 2013 11:21 PM
Sixthy
General Technical
1
28 December 2011 08:38 PM
SCOOBYD00
Drivetrain
15
28 July 2005 09:06 AM
Dazza's-STi
ScoobyNet General
4
17 May 2004 04:44 PM
dhorwich
Drivetrain
10
21 April 2003 02:12 PM



Quick Reply: How much oil...



All times are GMT +1. The time now is 08:48 AM.