changing driveshafts easy or not?
#1
Scooby Regular
Thread Starter
Join Date: Nov 2002
Location: esssssssex
Posts: 757
Likes: 0
Received 0 Likes
on
0 Posts
need to change my driveshafts somewhere between now/work/and sunday! are they easy enough looks like the only time i can do is either 2moro nite or sat afternoon ready for sunday for a day out! any one reckon its easy or hard?
steve
steve
#3
Scooby Regular
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
easy... undo hub nuts before lifting the car..
jack the car... knock out roll pin in the green part of the driveshaft.. split bottom ball joint... may need to unbolt antiroll bar drop link.. pull strut out of the way enough to release drive shaft.. then slide of splined shaft of gearbox..
refitting is the reverse of removal.. (replace lock nuts or dont forget to split pin them.. whatever is fitted..)
David
jack the car... knock out roll pin in the green part of the driveshaft.. split bottom ball joint... may need to unbolt antiroll bar drop link.. pull strut out of the way enough to release drive shaft.. then slide of splined shaft of gearbox..
refitting is the reverse of removal.. (replace lock nuts or dont forget to split pin them.. whatever is fitted..)
David
#4
Scooby Regular
Thread Starter
Join Date: Nov 2002
Location: esssssssex
Posts: 757
Likes: 0
Received 0 Likes
on
0 Posts
thanx for that best i get started! reason i changin is ive fitted a p1 gearbox and the standard uk ones arent really a great fit so swapping for p1 jobbies!
steve
steve
#6
Scooby Regular
Thread Starter
Join Date: Nov 2002
Location: esssssssex
Posts: 757
Likes: 0
Received 0 Likes
on
0 Posts
the standard uk ones dont seem to fit too well! have changed one of them which was starting to get a bit noisy and seemed to fit a lot more snug!
steve
steve
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM