HELP MY CAR'S POORLY
11 February 2003, 09:39 PM
#1
Scooby Regular
Thread Starter
Join Date: Feb 2002
Location: Hunting down door dinger's in south wales..
Posts: 2,485
Likes: 0
Received 2 Likes
on
2 Posts
I've got an MY98,
whilst driving on saturday had a knocking coming from underneath my car, which sounds like the knock from a c/v joint. Seems worse when i drive around a corner in a high gear at slow speed's, so i jacked up the car but could not see anything obvious, and i am not that mecanicly minded on how this AWD and the diffs work.
anyone know what it could be
whilst driving on saturday had a knocking coming from underneath my car, which sounds like the knock from a c/v joint. Seems worse when i drive around a corner in a high gear at slow speed's, so i jacked up the car but could not see anything obvious, and i am not that mecanicly minded on how this AWD and the diffs work.
anyone know what it could be
12 February 2003, 09:55 AM
#2
Scooby Regular
Join Date: Feb 2002
Location: oustide the asylum?
Posts: 3,306
Likes: 0
Received 0 Likes
on
0 Posts
It could very well be a CV joint - they do wear out sometimes. Is there any play in the drive shaft?
If not, then it could be the lower ball joint (under the hub) I have heard of these making knocking noises before.
If not, then it could be the lower ball joint (under the hub) I have heard of these making knocking noises before.
02 December 2003, 08:25 PM
#4
Scooby Regular
Thread Starter
Join Date: Feb 2002
Location: Hunting down door dinger's in south wales..
Posts: 2,485
Likes: 0
Received 2 Likes
on
2 Posts
Cheer's dmb, going in the garage 2morrow to see what it is...
Sammyh how you doing mate.??
Edited to say there did not seem to be any wear in the drive shaft when i checked it out..!!
[Edited by lee mclaughlan - 2/12/2003 8:27:38 PM]
Sammyh how you doing mate.??
Edited to say there did not seem to be any wear in the drive shaft when i checked it out..!!
[Edited by lee mclaughlan - 2/12/2003 8:27:38 PM]
Thread
Thread Starter
Forum
Replies
Last Post
JonMc
Subaru Parts
22
06 February 2016 09:50 PM
ossett2k2
Engine Management and ECU Remapping
15
23 September 2015 09:11 AM