Do i fit my dawes???
#1
I have a MY97uk, with: -
full magnex decat
ported manifold
ported throttle body
ported intercooler pipes (entry sides knife edged - the aluminium ones)
induction kit
intercooler tilt mod & splitter
FCD (new boost cut set to 19.5psi)
Walbro fuel pump
AFR guage
Now with a bit of trickery with restrictors i was getting 17.5 psi held boost (from 3,500 till 5500, then started dropping to 15psi at 6,250. I liked this as it wasn't peaky and the ecu could retard boost incase of detonation etc.
But as of saturday it when very peaky, which i'm not happy with, see http://www.scoobynet.co.uk/bbs/threa...hreadid=173225
I do have a dawes sitting around here, the question is do i fit it, i understand this will be less peaky. I know that the fueling is ok for 17.5 held, and there has been no det (borrowed a friends detcans).
Anyone help me????
Iain
full magnex decat
ported manifold
ported throttle body
ported intercooler pipes (entry sides knife edged - the aluminium ones)
induction kit
intercooler tilt mod & splitter
FCD (new boost cut set to 19.5psi)
Walbro fuel pump
AFR guage
Now with a bit of trickery with restrictors i was getting 17.5 psi held boost (from 3,500 till 5500, then started dropping to 15psi at 6,250. I liked this as it wasn't peaky and the ecu could retard boost incase of detonation etc.
But as of saturday it when very peaky, which i'm not happy with, see http://www.scoobynet.co.uk/bbs/threa...hreadid=173225
I do have a dawes sitting around here, the question is do i fit it, i understand this will be less peaky. I know that the fueling is ok for 17.5 held, and there has been no det (borrowed a friends detcans).
Anyone help me????
Iain
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
JonMc
Subaru Parts
22
06 February 2016 09:50 PM
matt12
ScoobyNet General
64
16 September 2015 09:16 PM
matt12
Engine Management and ECU Remapping
4
14 September 2015 09:36 AM