hks induction
13 January 2003, 08:16 PM
#4
here we go, scanner decided it didn't want to work so I took a picture, the instructions aren't that helpful as they are in Japanese
Just take your standard airbox and resonator box off, top right of the picture below starting with [H] this is the rubber pipe on your car which goes to the turbo, [G] is the alloy pipe that should have come with your filter, this goes in [H].
[F] is the airflow meter(unbolt this from standard airbox) this goes onto the alloy pipe [G] via the rubber pipe [C] fastened with jubilee clips{B}, airfilter[A] fits to airflow meter[F] via rubber pipe[C] and adaptor plate[D] using jubilee clips{B}.
Bracket[L] has a hanger bolted to it[M] which fits under the jubille clip on the air filter(then tighten), bracket [L] then bolts to mounting hole on car chassis(under air filter).
Bracket[K] bolts to airflow meter and onto bolt on chassis(boost solenoid mounting bolt)
Hope this makes sense, need anymore help just say
James[/b]
[Edited by jameswrx - 1/13/2003 8:18:19 PM]
Just take your standard airbox and resonator box off, top right of the picture below starting with [H] this is the rubber pipe on your car which goes to the turbo, [G] is the alloy pipe that should have come with your filter, this goes in [H].
[F] is the airflow meter(unbolt this from standard airbox) this goes onto the alloy pipe [G] via the rubber pipe [C] fastened with jubilee clips{B}, airfilter[A] fits to airflow meter[F] via rubber pipe[C] and adaptor plate[D] using jubilee clips{B}.
Bracket[L] has a hanger bolted to it[M] which fits under the jubille clip on the air filter(then tighten), bracket [L] then bolts to mounting hole on car chassis(under air filter).
Bracket[K] bolts to airflow meter and onto bolt on chassis(boost solenoid mounting bolt)
Hope this makes sense, need anymore help just say
James[/b]
[Edited by jameswrx - 1/13/2003 8:18:19 PM]
01 December 2003, 12:46 PM
#6
Scooby Regular
Thread Starter
iTrader: (51)
Join Date: Nov 2002
Location: MSOC
Posts: 7,439
Likes: 0
Received 0 Likes
on
0 Posts
Has anyone got the fitting instructions for an HKS induction kit as i have just bought one off of e-bay and it doesn't come with any.
Edited to say that my car is an MY95 wrx. Please help
[Edited by martin850 - 1/13/2003 7:29:37 PM]
Edited to say that my car is an MY95 wrx. Please help
[Edited by martin850 - 1/13/2003 7:29:37 PM]
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
crazyspeedfreakz
Wanted
17
05 October 2015 07:19 PM
charlesr
General Technical
9
28 September 2015 09:16 AM