top

hi mate, i got some here i'll try n scan em in and post em up in about 10min
james

That would be great thanks

here we go, scanner decided it didn't want to work so I took a picture, the instructions aren't that helpful as they are in Japanese:rolleyes:

Just take your standard airbox and resonator box off, top right of the picture below starting with [H] this is the rubber pipe on your car which goes to the turbo, [G] is the alloy pipe that should have come with your filter, this goes in [H].
[F] is the airflow meter(unbolt this from standard airbox) this goes onto the alloy pipe [G] via the rubber pipe [C] fastened with jubilee clips{B}, airfilter[A] fits to airflow meter[F] via rubber pipe[C] and adaptor plate[D] using jubilee clips{B}.
Bracket[L] has a hanger bolted to it[M] which fits under the jubille clip on the air filter(then tighten), bracket [L] then bolts to mounting hole on car chassis(under air filter).
Bracket[K] bolts to airflow meter and onto bolt on chassis(boost solenoid mounting bolt)

Hope this makes sense, need anymore help just say:)

http://upload.turbosport.co.uk/getpi...5931532360.JPG

James[/b]

[Edited by jameswrx - 1/13/2003 8:18:19 PM]

thats just what i was after thanks. I will give it a whirl as soon as the air filter arrives

Has anyone got the fitting instructions for an HKS induction kit as i have just bought one off of e-bay and it doesn't come with any.

Edited to say that my car is an MY95 wrx. Please help

[Edited by martin850 - 1/13/2003 7:29:37 PM]