HKS Downpipe -> OE Centre
15 September 2002, 07:46 PM
#2
Scooby Regular
Join Date: Aug 2002
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Ian, yes you need to use an olive when fitting the HKS downpipe. However you will need to get an engineering workshop to weld a sleeve into the downpipe as the HKS don't have one. I have an HKS pipe fitted to my car and managed to get a local fabrication company to weld in a sleeve roughly 15mm wide into the downpipe then you can use the original olive off the standard downer.
Hope this helps
Regards
Mako
Hope this helps
Regards
Mako
16 September 2002, 10:43 AM
#4
Scooby Regular
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
just get them to spot weld it, not seam weld it so you can remove it if necessary (3" centre section at some point)
David
David
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM