clutch questions?
11 September 2002, 08:21 PM
#1
Scooby Regular
Thread Starter
Join Date: Sep 2002
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Hello,
my clutch on a my94 wrx has just started slipping when you nail it in first gear,its fine at all other times,does any one know of any localish garages i could use?i live in west sussex
and roughly how much it would cost,is it possible to do myself ive done several on front wheel drive cars ok,any help would be appreciated
Gaz........
my clutch on a my94 wrx has just started slipping when you nail it in first gear,its fine at all other times,does any one know of any localish garages i could use?i live in west sussex
and roughly how much it would cost,is it possible to do myself ive done several on front wheel drive cars ok,any help would be appreciated
Gaz........
11 September 2002, 08:42 PM
#2
Scooby Regular
iTrader: (3)
Join Date: Aug 2000
Location: 1600cc's of twin scroll fun :)
Posts: 25,565
Likes: 0
Received 2 Likes
on
2 Posts
Myself id say go for an AP organic or Helix clutch which are stronger than the standard ones (by quite a margin i hasten to add 
) but i dont know of any garages in your area unless your willing to travel a little? (scoobysport in essex for instance?)
Scoobymania do AP clutches, they cost around 350ish which is about the same as a subaru one.
Tony
) but i dont know of any garages in your area unless your willing to travel a little? (scoobysport in essex for instance?)Scoobymania do AP clutches, they cost around 350ish which is about the same as a subaru one.
Tony
12 September 2002, 11:40 AM
#3
Scooby Regular
Call Rivett autos 01306 628009 tell Mike, Iain sent you.
He's near Horsham (just off the A29) and is a Subaru specialist.
He'll do you a std Subaru clutch or an uprated STI or AP kit fitted, cheaper than you can buy them!!!
He's near Horsham (just off the A29) and is a Subaru specialist.
He'll do you a std Subaru clutch or an uprated STI or AP kit fitted, cheaper than you can buy them!!!
Thread
Thread Starter
Forum
Replies
Last Post
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM