quantity of exhaust wrap required, any ideas?
#1
as title. i want to use the exhaust wrap to cover my manifold/up-pipe and also my 3" downpipe.
however, have looked whats for sale etc, but have no idea about what sort of quantity is required. i dont want to just buy some, then get more if required, as the shop is about 40miles away
anyone done it and know?
cheers
ian
however, have looked whats for sale etc, but have no idea about what sort of quantity is required. i dont want to just buy some, then get more if required, as the shop is about 40miles away
anyone done it and know?
cheers
ian
#2
Scooby Regular
iTrader: (5)
I wrapped my Scoobysport D'pipe with 50' of 1" wide tape then sprayed it with the dedicated high temp. paint, so I guess you will need a bit more than this. You may just get away with the whole job by using 2" wide tape instead? You will get the most awful smelling (and very embarrasing) smoke as the tape "burns in" especially if you use the spray (recommended) Don't drive in traffic straight away as someone will probably call the fire brigade!
JohnD
JohnD
#5
I got mine from demon tweeks where I always get a decent discount.
Used 1 50m roll on my headers, not a nice job but worth doing.
use gloves and soak the wrap before you apply it. Demon also supply a kind of ratchet band which will keep the stuff in place.
Used 1 50m roll on my headers, not a nice job but worth doing.
use gloves and soak the wrap before you apply it. Demon also supply a kind of ratchet band which will keep the stuff in place.
#6
\m/ ^_^ \m/
hi ian, i managed to do my manifolds, up pipe and half of my downpipe with 1 box of the stuff (about the same amount as above), spayed it aswell, the smoke lasted about 3 or 4 drives, very embarrassing )
thinking about putting it the entire length of my system to keep it quiet probably rip it all off on the first speed bump i encounter
kev
thinking about putting it the entire length of my system to keep it quiet probably rip it all off on the first speed bump i encounter
kev
#7
\m/ ^_^ \m/
also it depends on how much overlap you use to the amount of distance you cover, you'll use up alot going around the bends on the manifold
kev
kev
Trending Topics
#8
Adam, thats where i'll be going for mine, not too far from here. not the cheapest place but hey, if you get a discount
hi kev, how are you mate, managed to break anything else recently?
cheers
ian
hi kev, how are you mate, managed to break anything else recently?
cheers
ian
#9
\m/ ^_^ \m/
yep, been on holiday for 2 weeks, came back and the front brakes have seized (all that rain plus no seals on the pistons )
got a job for the weekend now (knew i should of fitted the seal kit earlier )
kev
got a job for the weekend now (knew i should of fitted the seal kit earlier )
kev
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
MightyArsenal
Wheels, Tyres & Brakes
6
25 September 2015 08:31 PM