Sticking clutch pedal.
25 June 2002, 10:19 PM
#1
Scooby Newbie
Thread Starter
Join Date: Jan 2002
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
I have been running my scoob since last November and on occasions I have noticed the clutch pedal being a bit slow to come back up, or a couple of times stay half way down until acceleration is eased. It only happens during a quick down change/hard acceleration (usually going from 4 to 3 for an overtake). It doesn't seem to get any worse. Anybody else had this or is it trying to tell me something - like get your credit card out? It's a 94 WRX.
Any answers, advice, appreciated. Sam.
Any answers, advice, appreciated. Sam.
26 June 2002, 02:34 PM
#3
If the clutch Master cylinder seals are worn, this can sometimes cause a sticky pedal. A general sign of wear is the travel of the pedal does not feel smooth, slightly grabby Etc.
Dean
Dean
26 June 2002, 09:43 PM
#4
Scooby Regular
iTrader: (1)
Join Date: Oct 2001
Location: South East
Posts: 1,300
Likes: 0
Received 0 Likes
on
0 Posts
I have a similar thing ...
when I brake hard, say 70 -> 40/30 and depress the clutch to downshift at the same time, everything seems ok...but as I release the clutch it seems odd - in that ALL the pressure is off the pedal in a few inches of movement.
Press the pedal again and it's the same - until you release the brake !
anyone had the same?
Steve
[Edited by ScoobyDuck - 6/26/2002 9:45:32 PM]
when I brake hard, say 70 -> 40/30 and depress the clutch to downshift at the same time, everything seems ok...but as I release the clutch it seems odd - in that ALL the pressure is off the pedal in a few inches of movement.
Press the pedal again and it's the same - until you release the brake !
anyone had the same?
Steve
[Edited by ScoobyDuck - 6/26/2002 9:45:32 PM]
Thread
Thread Starter
Forum
Replies
Last Post