Newage Clutch Master Cylinder in Classic
#1
Scooby Regular
Thread Starter
Newage Clutch Master Cylinder in Classic
I have seen photos on this forum but never a clear how to on the install.
Newage clutch master cylinders have two ports for the hardlines that goes to the slave cylinder and the classic has one.
I was wondering how people make it work?
I'm thinking of plugging off one of the ports and ditching the stock hardlines to run a stainless steel line from master cylinder directly to the slave. Does it matter which port I blank off and which port I use to connect to the slave?
Thanks.
Newage clutch master cylinders have two ports for the hardlines that goes to the slave cylinder and the classic has one.
I was wondering how people make it work?
I'm thinking of plugging off one of the ports and ditching the stock hardlines to run a stainless steel line from master cylinder directly to the slave. Does it matter which port I blank off and which port I use to connect to the slave?
Thanks.
#2
Scooby Regular
Thread Starter
Update!
In case anyone else is looking to do this, here is a photo of it installed.
I reused plus re-routed the stock hard lines like this and got a aluminum block off plug for the other port.
The pedal feel has improved slightly and I am free to upgrade to a larger top mount intercooler without fear of hitting the clutch master cylinder reservoir. It is a worthwhile upgrade if you can find a RHD clutch master cylinder. They are getting pretty hard to source in good condition and the rebuild kit for them is even harder.
In case anyone else is looking to do this, here is a photo of it installed.
I reused plus re-routed the stock hard lines like this and got a aluminum block off plug for the other port.
The pedal feel has improved slightly and I am free to upgrade to a larger top mount intercooler without fear of hitting the clutch master cylinder reservoir. It is a worthwhile upgrade if you can find a RHD clutch master cylinder. They are getting pretty hard to source in good condition and the rebuild kit for them is even harder.
The following users liked this post:
Thread
Thread Starter
Forum
Replies
Last Post
Jay Cartay
General Technical
2
04 October 2016 06:53 PM
the shreksta
Drivetrain
3
17 March 2013 03:09 PM