REMOVING PULLEY WHEEL
08 June 2002, 04:41 PM
#1
Scooby Regular
Thread Starter
Join Date: Jan 2001
Posts: 534
Likes: 0
Received 0 Likes
on
0 Posts
i need to remove the small pulley wheel on the drivers side of the car in front of the power sterring reservoir.
It is approx 10 cm diameter and has four larger holes in it . The belt from the alternator runs to it.
it looks to be held on by a large nut , the reason for removal is that it is corroded badly and i want to repaint it
Is it just a case of removing the alternator belt , and then undoing the nut or is there more to its removal ?
thnaks
It is approx 10 cm diameter and has four larger holes in it . The belt from the alternator runs to it.
it looks to be held on by a large nut , the reason for removal is that it is corroded badly and i want to repaint it
Is it just a case of removing the alternator belt , and then undoing the nut or is there more to its removal ?
thnaks
09 June 2002, 06:45 PM
#2
Scooby Regular
Join Date: Jan 2002
Posts: 1,909
Likes: 0
Received 0 Likes
on
0 Posts
yep, should be straight forward, although they can stick a little, just give it a light tap if so and it should come off.
ian
(p.s. that pulley and unit is actually the power steering pump)
ian
(p.s. that pulley and unit is actually the power steering pump)
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
55
05 August 2018 07:02 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM