Any UK Apexi Exhaust dealers?
#6
You are contacted Funky Power,they're UK distributor of Apexi
http://www.funkypower.co.uk/index.php
Jura
http://www.funkypower.co.uk/index.php
Jura
#7
Scooby Regular
iTrader: (7)
http://www.funkypower.co.uk/search.p...exi+n1&x=0&y=0
If you are just replacing your N1 to new one N1,you don't need any remap.
Jura
Trending Topics
#8
If its your exhaust Apeexi N1,here is it,expensive
http://www.funkypower.co.uk/search.p...exi+n1&x=0&y=0
If you are just replacing your N1 to new one N1,you don't need any remap.
Jura
http://www.funkypower.co.uk/search.p...exi+n1&x=0&y=0
If you are just replacing your N1 to new one N1,you don't need any remap.
Jura
I would be quite happy with a Ninja system but the apexi is like one piece from exhaust backbox to header whereas most other systems you buy the backbox and centre section.
I'm confuse as to what consistutes the need for a remap if you replacing for the same size system ie. 2.5"
#9
If its your exhaust Apeexi N1,here is it,expensive
http://www.funkypower.co.uk/search.p...exi+n1&x=0&y=0
If you are just replacing your N1 to new one N1,you don't need any remap.
Jura
http://www.funkypower.co.uk/search.p...exi+n1&x=0&y=0
If you are just replacing your N1 to new one N1,you don't need any remap.
Jura
#10
Scooby Regular
iTrader: (7)
Jura do you know that if I replace the exhaust from the headers for the same 2.5" and 5" backbox why would I need a remap?
I would be quite happy with a Ninja system but the apexi is like one piece from exhaust backbox to header whereas most other systems you buy the backbox and centre section.
I'm confuse as to what consistutes the need for a remap if you replacing for the same size system ie. 2.5"
I would be quite happy with a Ninja system but the apexi is like one piece from exhaust backbox to header whereas most other systems you buy the backbox and centre section.
I'm confuse as to what consistutes the need for a remap if you replacing for the same size system ie. 2.5"
But if everything is same like your ex exhaust(N1) on new one(size i assume is same,length and backbox size is same),you should be OK without the remap or if your car has been all ready mapped,tweak can be needed,but still think you should be OK without tweak or remap.
For peace of mind you can visit RR(Rolling road),where can do Det test,AFR test too.
Jura
Will fit too on Classic,just one hanger on backbox will not fit,which can be rewelded on correct place.
Jura
#11
Maybe just tweak of map(is cheaper than whole remap),but mainly depends on more factors than exhaust size.
But if everything is same like your ex exhaust(N1) on new one(size i assume is same,length and backbox size is same),you should be OK without the remap or if your car has been all ready mapped,tweak can be needed,but still think you should be OK without tweak or remap.
For peace of mind you can visit RR(Rolling road),where can do Det test,AFR test too.
Jura
Will fit too on Classic,just one hanger on backbox will not fit,which can be rewelded on correct place.
Jura
But if everything is same like your ex exhaust(N1) on new one(size i assume is same,length and backbox size is same),you should be OK without the remap or if your car has been all ready mapped,tweak can be needed,but still think you should be OK without tweak or remap.
For peace of mind you can visit RR(Rolling road),where can do Det test,AFR test too.
Jura
Will fit too on Classic,just one hanger on backbox will not fit,which can be rewelded on correct place.
Jura
Thread
Thread Starter
Forum
Replies
Last Post
fatboy_coach
General Technical
15
18 June 2016 03:48 PM