Any UK Apexi Exhaust dealers?
As above. :thumb:
|
Come on cash waiting for an N1:thumb:
|
Did you have any luck finding a place? After a GT2 exhaust system myself
|
Originally Posted by TMX
(Post 10175800)
Did you have any luck finding a place? After a GT2 exhaust system myself
No, not one company contacted me! |
You are contacted Funky Power,they're UK distributor of Apexi
http://www.funkypower.co.uk/index.php Jura |
Originally Posted by jura11
(Post 10180612)
You are contacted Funky Power,they're UK distributor of Apexi
http://www.funkypower.co.uk/index.php Jura |
Originally Posted by ScoobLou
(Post 10180617)
Thanks for that, I only want to replace like for like so I don't have to have a remap but I'm unsure if this is just scare mongering!
http://www.funkypower.co.uk/search.p...exi+n1&x=0&y=0 If you are just replacing your N1 to new one N1,you don't need any remap. Jura |
Originally Posted by jura11
(Post 10180629)
If its your exhaust Apeexi N1,here is it,expensive
http://www.funkypower.co.uk/search.p...exi+n1&x=0&y=0 If you are just replacing your N1 to new one N1,you don't need any remap. Jura I would be quite happy with a Ninja system but the apexi is like one piece from exhaust backbox to header whereas most other systems you buy the backbox and centre section. I'm confuse as to what consistutes the need for a remap if you replacing for the same size system ie. 2.5":wonder: |
Originally Posted by jura11
(Post 10180629)
If its your exhaust Apeexi N1,here is it,expensive
http://www.funkypower.co.uk/search.p...exi+n1&x=0&y=0 If you are just replacing your N1 to new one N1,you don't need any remap. Jura |
Originally Posted by ScoobLou
(Post 10180646)
Jura do you know that if I replace the exhaust from the headers for the same 2.5" and 5" backbox why would I need a remap?
I would be quite happy with a Ninja system but the apexi is like one piece from exhaust backbox to header whereas most other systems you buy the backbox and centre section. I'm confuse as to what consistutes the need for a remap if you replacing for the same size system ie. 2.5":wonder: But if everything is same like your ex exhaust(N1) on new one(size i assume is same,length and backbox size is same),you should be OK without the remap or if your car has been all ready mapped,tweak can be needed,but still think you should be OK without tweak or remap. For peace of mind you can visit RR(Rolling road),where can do Det test,AFR test too. Jura
Originally Posted by ScoobLou
(Post 10180648)
That says its for a 2002 onwards car though.:(:(
Jura |
Originally Posted by jura11
(Post 10180661)
Maybe just tweak of map(is cheaper than whole remap),but mainly depends on more factors than exhaust size.
But if everything is same like your ex exhaust(N1) on new one(size i assume is same,length and backbox size is same),you should be OK without the remap or if your car has been all ready mapped,tweak can be needed,but still think you should be OK without tweak or remap. For peace of mind you can visit RR(Rolling road),where can do Det test,AFR test too. Jura Will fit too on Classic,just one hanger on backbox will not fit,which can be rewelded on correct place. Jura |
All times are GMT +1. The time now is 11:08 PM. |
© 2024 MH Sub I, LLC dba Internet Brands