ScoobyTeknix gone?
#2
dont think so as i was chatting to andy this morning about servicing my car and he said he has a full appointment book. they have moved units though.
Scoobyteknixuk Tuning Products Performance Parts Ecu Remap Pre-Used Parts Breakers Servicing
Scoobyteknixuk Tuning Products Performance Parts Ecu Remap Pre-Used Parts Breakers Servicing
Last edited by phil_wrx; 23 January 2009 at 08:18 PM.
#3
RIP Scoobyteknix..... Hello ScoobyteknixUK.
From what I gather, it was something to do with a silent partner who no longer wished to be part of Scoobyteknix, hence the liquidation and re-opening...
From what I gather, it was something to do with a silent partner who no longer wished to be part of Scoobyteknix, hence the liquidation and re-opening...
#4
Scooby Regular
Thread Starter
Join Date: Feb 2003
Location: Zed Ess Won Hay Tee
Posts: 21,611
Likes: 0
Received 0 Likes
on
0 Posts
One of them is dissolved, and the other one is in liquidation according to the companies house website
also saw 2 different addresses and wondered if they had moved
he best get onto them and give em a kick up the backside if its all wrong
also saw 2 different addresses and wondered if they had moved
he best get onto them and give em a kick up the backside if its all wrong
#5
makes no difference what there called andy has always given me top notch service and thats why i always take my car back to him.
when i got my car knicked and needed the locks all changing and keys recoding andy sorted it cheaply, he was a life saver.
when i got my car knicked and needed the locks all changing and keys recoding andy sorted it cheaply, he was a life saver.
#6
Scooby Regular
iTrader: (11)
Join Date: Nov 2007
Location: 2.1cdb, gt30 billet, syvecs
Posts: 1,081
Likes: 0
Received 3 Likes
on
2 Posts
g
people must have nothing better to do!!!!
i have got my timeattack car with scoobyteknix
they have been building the car for over 8 months now.
i have never had any issues with andy or bri, always get more than i ask for of them. i recieved 4 sets of toyo r888 to my house last week, i rang andy up and he said that it was just some part of the sponser program for my timeattack car. he also organised my cage to be welded in my car and to issue a fia cert at NO COST AGAIN ,
these are just a few points i felt a needed to share.
this company is a very well respected company throughout the north west
and through my experience very well deserved.
keep up the good work andy and bri, 700hp is not far away now
regards
i have got my timeattack car with scoobyteknix
they have been building the car for over 8 months now.
i have never had any issues with andy or bri, always get more than i ask for of them. i recieved 4 sets of toyo r888 to my house last week, i rang andy up and he said that it was just some part of the sponser program for my timeattack car. he also organised my cage to be welded in my car and to issue a fia cert at NO COST AGAIN ,
these are just a few points i felt a needed to share.
this company is a very well respected company throughout the north west
and through my experience very well deserved.
keep up the good work andy and bri, 700hp is not far away now
regards
Trending Topics
#9
cheers guys ,, nothing to worry about we are still here....
its been just simply a paperwork exercise,,,,,,,,
we have downsized to help us be more efficient and a change of direction was needed,,, out with the old and in with the new
cheers Andy
its been just simply a paperwork exercise,,,,,,,,
we have downsized to help us be more efficient and a change of direction was needed,,, out with the old and in with the new
cheers Andy
#10
Former Sponsor
iTrader: (20)
Join Date: Oct 2006
Location: 8.95 @ 168mph. Zero to 1KM 194.1mph
Posts: 1,150
Likes: 0
Received 0 Likes
on
0 Posts
You found THAT strange !
Well I've heard about golfers, stamp collectors, and even train spotters, but it's the first time I've come across anyone who spends their time trawling through Companies House listings !
#12
Scooby Regular
Thread Starter
Join Date: Feb 2003
Location: Zed Ess Won Hay Tee
Posts: 21,611
Likes: 0
Received 0 Likes
on
0 Posts
The link (companies house)was posted on SN yesterday and somebody mentioned scoobynets accounts were over due, i typed in scoobynet and it brought up all the scoobys on one page
#21
Scooby Regular
iTrader: (9)
Join Date: Sep 2008
Location: Kobenhagen, Denmark
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
Do U have anything nice???
My car has been made by Alan Jeffery, and it has all the good mods
ready for a lot of Hp, now i have the gearbox, need a engine witch can makes 400-450 hp, thinks a ej257 with forged pistons and internals?!!
My problem is the intake, it can only make 350Hp....Any idears??
Do U have seats front and rear I can use, black is best
And I need 4 pot front calibers too....
Is these things what U have in minde ....
My car has been made by Alan Jeffery, and it has all the good mods
ready for a lot of Hp, now i have the gearbox, need a engine witch can makes 400-450 hp, thinks a ej257 with forged pistons and internals?!!
My problem is the intake, it can only make 350Hp....Any idears??
Do U have seats front and rear I can use, black is best
And I need 4 pot front calibers too....
Is these things what U have in minde ....
Last edited by Eacy; 26 January 2009 at 07:45 PM.
#22
#23
Scooby Regular
iTrader: (9)
Join Date: Sep 2008
Location: Kobenhagen, Denmark
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
...
[QUOTE=Eacy;8457590]Do U have anything nice???
My car has been made by Alan Jeffery, and it has all the good mods, FMIC, apexi Fc ...fuel-stuff........
ready for a lot of Hp, now i have the gearbox, need a engine witch can makes 400-450 hp, thinks a ej257 with forged pistons and internals?!!
My problem is the intake, it can only make 350Hp....Any idears??
Do U have seats front and rear I can use, black is best
And I need 4 pot front calibers too....
Is these things what U have in minde ....
My car has been made by Alan Jeffery, and it has all the good mods, FMIC, apexi Fc ...fuel-stuff........
ready for a lot of Hp, now i have the gearbox, need a engine witch can makes 400-450 hp, thinks a ej257 with forged pistons and internals?!!
My problem is the intake, it can only make 350Hp....Any idears??
Do U have seats front and rear I can use, black is best
And I need 4 pot front calibers too....
Is these things what U have in minde ....
#24
**Edited due to commercial content**
Please contact advertise@scoobynet.com for details of advertising opportunities on Scoobynet.
Please contact advertise@scoobynet.com for details of advertising opportunities on Scoobynet.
Last edited by New_scooby_04; 27 January 2009 at 11:56 PM.
#26
again,,, would love to go back to my original user name but that says "account under investigation" from years ago,, tried getting that removed from the mods loads of times, but nobody ever replies to me
Last edited by scooby teknix; 28 January 2009 at 09:12 PM.
#29
Scooby Regular
iTrader: (2)
Join Date: Oct 2002
Location: Aldershot
Posts: 1,861
Likes: 0
Received 0 Likes
on
0 Posts
Yeah you've done a good job on it, soo much torque might as well be a 1 speed car, 5th gear is good from 30 to the redline
Keeping the free advertising on it although not sure you'll get much trade from it as the car now lives in the south east
Keeping the free advertising on it although not sure you'll get much trade from it as the car now lives in the south east