J-W Racing Quickshift
#1
Fitted mine eventually yesterday, but I can't get the two nylon washers to fit, has anyone else had problems or got a suggested solution!!
More worryingly, once I had tightened the connecting nut and bolt up, I couldn't move the lever. As I loosen the nut and bolt the lever becomes progressively easier to move. The bolt is currently a good three quarter turn from tight, yet the lever is still nowhere near usable on a day to day basis.
I have fitted everything as spec except for one nylon washer as mentioned.
Anyone able to suggest a solution?
More worryingly, once I had tightened the connecting nut and bolt up, I couldn't move the lever. As I loosen the nut and bolt the lever becomes progressively easier to move. The bolt is currently a good three quarter turn from tight, yet the lever is still nowhere near usable on a day to day basis.
I have fitted everything as spec except for one nylon washer as mentioned.
Anyone able to suggest a solution?
#2
There are 2 different types of holders for the Nylon washers. As there are also 2 different types of Linkage.
Make sure you have the correct Nylon washers for the correct linkage.
If you are still unsure i can order you the correct ones! Just need chassis no
Make sure you have the correct Nylon washers for the correct linkage.
If you are still unsure i can order you the correct ones! Just need chassis no
Thread
Thread Starter
Forum
Replies
Last Post
Pro-Line Motorsport
Car Parts For Sale
2
29 September 2015 07:36 PM