PaulC555

Hi all

I've got a HP 1710 PDA which I use every now and again ....unfortunately though I have left it alone for to long and the battery seems to have died....which I know means a complete set up again...however when I plug in the USB/mains charger thingy ...Im not even getting a charge light on the unit.....any ideas...can the battery go that flat that its impossible to charge again...???

cheers
Paul

Criss

Battries can go thet flat it will not charge, can you use them from a mains supply (eliminating the need for a battry?)

Monkeybone

usually it takes a little while from plugging it in when proper flat before you can get it to power on.

joey_turbo

iTrader: (26)

It usually takes a while if its completley flat, as mentioned. But on my HP H5550, I have to allow USB charging in the setup. Which obviously doesn't help, but if thats the case, you should look at a normal charger.

agent003

Same as here m8 https://www.scoobynet.com/computer-r...-problems.html

WBR

PaulC555

thanks for all the advice..will try a long charge first and see if that springs it to life....if not perhaps being turfed out of the scoob at 70 should do it...