Help Needed with PDA
 

Hi all

I've got a HP 1710 PDA which I use every now and again ....unfortunately though I have left it alone for to long and the battery seems to have died....which I know means a complete set up again...however when I plug in the USB/mains charger thingy ...Im not even getting a charge light on the unit.....any ideas...can the battery go that flat that its impossible to charge again...???

cheers
Paul

Battries can go thet flat it will not charge, can you use them from a mains supply (eliminating the need for a battry?)

usually it takes a little while from plugging it in when proper flat before you can get it to power on.

It usually takes a while if its completley flat, as mentioned. But on my HP H5550, I have to allow USB charging in the setup. Which obviously doesn't help, but if thats the case, you should look at a normal charger.

Same as here m8 https://www.scoobynet.com/computer-r...-problems.html

WBR

thanks for all the advice..will try a long charge first and see if that springs it to life....if not perhaps being turfed out of the scoob at 70 should do it...