unattended setups
21 April 2006, 02:39 PM
#1
Scooby Regular
Thread Starter
unattended setups
for office2003.
Theres millions of pages out there but havent found anything that has a clear procedure. Looked on ms technet etc
Anyone know a good site that has this?
Theres millions of pages out there but havent found anything that has a clear procedure. Looked on ms technet etc
Anyone know a good site that has this?
21 April 2006, 03:04 PM
#2
Scooby Regular
Join Date: Apr 2004
Location: Cardiff
Posts: 1,928
Likes: 0
Received 0 Likes
on
0 Posts
Guide to slipstream Office 2003 SP2 into Microsoft Office 2003 CD
Use this simple guide to create an Microsoft Office 2003 CD that has an integrated (slipstreamed) SP2 to avoid having to manually install the updates later. We do an administrative Office 2003 installation so that you don't have to enter product keys or other information while installing Office 2003. You will however need to activate the product.
Before you slipstream Office 2003 and Service Pack 2 into one CD., you'll need the access to your Microsoft Office 2003 CD with product key, Microsoft Office 2003 SP2 - fullfile version Office2003SP2-kb887616-fullfile-enu.exe and some of your precious time.
Here's an easy to follow step-by-step guide to Slipstream Office 2003 and SP2:
1. Create three folders on you c: drive - c:\MSOffice2003 | c:\Office2003SP2 | c:\tempSP2
2. Now Insert the Office 2003 CD and type "x:\setup.exe /a" in the Run dialog [x is your cd-rom drive letter]
3. Enter the required information like Name, Organization and Office 2003 Product Key. Click Next
4. Here you should choose c:\MSOffice2003 as the installation point
5. Accept the End User License Agreement [EULA] and click next. Files are now being copied to the installation pointed choose in step 4.
6. All files need to launch office 2003 setup is being copied in to the folder you have been selected.
7. Copy Office 2003 SP2 file in the folder c:\tempSP2
8. Execute the following commands in sequence from the Run dialog.
8a. Command to extract all Office 2003 SP2 files into the Office2003SP2 folder.
C:\TempSP2\Office2003SP2-kb887616-fullfile-enu.exe /Q /C
/T:C:\Office2003SP2
8b. Command to slipstream main office 2003 files.
msiexec /p C:\Office2003SP2\MAINSP2ff.msp /a C:\MSOffice2003\PRO11.msi SHORTFILENAMES=TRUE /qb
8c. Command to integrate Office 2003 Web Components
msiexec /p C:\Office2003SP2\Owc11sp2ff.msp /a C:\MSOffice2003\OWC11.MSI SHORTFILENAMES=TRUE /qb
The Service Pack 2 has now been integrated into your Office 2003. It is safe to delete the c:\Office2003SP2 and c:\tempSP2 folders.
The Integrated (Slipstreamed) Office 2003 SP2 CD will require no serial (CD-key) during installation.
You can either burn the contents of the folder to CD or leave them on your hard drive.
Use this simple guide to create an Microsoft Office 2003 CD that has an integrated (slipstreamed) SP2 to avoid having to manually install the updates later. We do an administrative Office 2003 installation so that you don't have to enter product keys or other information while installing Office 2003. You will however need to activate the product.
Before you slipstream Office 2003 and Service Pack 2 into one CD., you'll need the access to your Microsoft Office 2003 CD with product key, Microsoft Office 2003 SP2 - fullfile version Office2003SP2-kb887616-fullfile-enu.exe and some of your precious time.
Here's an easy to follow step-by-step guide to Slipstream Office 2003 and SP2:
1. Create three folders on you c: drive - c:\MSOffice2003 | c:\Office2003SP2 | c:\tempSP2
2. Now Insert the Office 2003 CD and type "x:\setup.exe /a" in the Run dialog [x is your cd-rom drive letter]
3. Enter the required information like Name, Organization and Office 2003 Product Key. Click Next
4. Here you should choose c:\MSOffice2003 as the installation point
5. Accept the End User License Agreement [EULA] and click next. Files are now being copied to the installation pointed choose in step 4.
6. All files need to launch office 2003 setup is being copied in to the folder you have been selected.
7. Copy Office 2003 SP2 file in the folder c:\tempSP2
8. Execute the following commands in sequence from the Run dialog.
8a. Command to extract all Office 2003 SP2 files into the Office2003SP2 folder.
C:\TempSP2\Office2003SP2-kb887616-fullfile-enu.exe /Q /C
/T:C:\Office2003SP2
8b. Command to slipstream main office 2003 files.
msiexec /p C:\Office2003SP2\MAINSP2ff.msp /a C:\MSOffice2003\PRO11.msi SHORTFILENAMES=TRUE /qb
8c. Command to integrate Office 2003 Web Components
msiexec /p C:\Office2003SP2\Owc11sp2ff.msp /a C:\MSOffice2003\OWC11.MSI SHORTFILENAMES=TRUE /qb
The Service Pack 2 has now been integrated into your Office 2003. It is safe to delete the c:\Office2003SP2 and c:\tempSP2 folders.
The Integrated (Slipstreamed) Office 2003 SP2 CD will require no serial (CD-key) during installation.
You can either burn the contents of the folder to CD or leave them on your hard drive.
21 April 2006, 03:12 PM
#3
Scooby Regular
Join Date: Apr 2004
Location: Cardiff
Posts: 1,928
Likes: 0
Received 0 Likes
on
0 Posts
http://www.microsoft.com/office/orkarchive/2003ddl.htm
half way down the page to make a transform MST File in other works the setting can be pre-configured, ie docs default save to server space etc
Office 2003 Editions Resource Kit ork.exe
this may only work with certain versions of office that support packaging or that have been bought with a site license
if you are installing via a server and have done the above and made a transform
the install syntax is
\\server\path\Office2003\setuppro.exe TRANSFORMS=Transform.MST /qb
assuming the transform is in the same folder and called transform
half way down the page to make a transform MST File in other works the setting can be pre-configured, ie docs default save to server space etc
Office 2003 Editions Resource Kit ork.exe
this may only work with certain versions of office that support packaging or that have been bought with a site license
if you are installing via a server and have done the above and made a transform
the install syntax is
\\server\path\Office2003\setuppro.exe TRANSFORMS=Transform.MST /qb
assuming the transform is in the same folder and called transform
21 April 2006, 03:34 PM
#4
Scooby Regular
Thread Starter
thanks for all that, doing via server, yeah got the path (albiet in a different order) from running ork. tried it this was round too and it doesnt work either. entering it via run command if thats correct, though it doesnt like the spaces \\office 2003\
21 April 2006, 03:37 PM
#5
Scooby Regular
Join Date: Apr 2004
Location: Cardiff
Posts: 1,928
Likes: 0
Received 0 Likes
on
0 Posts
make a batch file in notepad with the path in it.
save it as office.bat or whatever, try that
silly question the account youre logged in as does have rights to the share?
save it as office.bat or whatever, try that
silly question the account youre logged in as does have rights to the share?
21 April 2006, 03:59 PM
#7
Scooby Regular
Thread Starter
ah double quotes thats why it put them in automatically before then swapped the order...ok.
running...Microsoft office setup.for command line parameters see setup.htm ok will see what that says...
running...Microsoft office setup.for command line parameters see setup.htm ok will see what that says...
Thread
Thread Starter
Forum
Replies
Last Post