albob

I've had my new Mitac mio168 for 2 weeks now - i'm having terribble problems loading programs to the PDA or Sd card. Keep getting 'disk access problem' error message, then activesync reports 'not connected' and sync is lost. disconnecting cable and reconnecting restores sync, but loading a map into the PDA's memory is a nightmare!!
I've tried different cables, usb socket of PC, reinstall of Activesync - no different
Any suggestions/advice welcomed !!!!!!!!!

alan

p.s. It does sometimes work, but 4 or 5 goes at loading a map is beyond a joke!!

Foot_Tapper

Not sure on a mitac, never had those probs with an ipaq.
Have loaded maps for a gps device, but make sure they are set to load to sd card.
maybe start from scratch again, and set up a new partnership

gregh

what version of async are you using?

albob

Its version 3.8

I thought it might be my Sd card, but i'm having same probs loading
to the Pda (could it be something to do with Tomtom? - its the only prog I have tried so far)

TopBanana

First thing I'd try is a different sd card

Graz

ActiveSync is very slow anyway, it's worth getting a USB2 memory card reader (£15 from ebuyer etc.) for big transfers to / from the card.

That said apart from the slowness I've not had any problems with my iPAQ with a CF card in it.

albob

I've bought a USB Sd card reader for a tenner from Ebay - much faster!!

devon03

if its any help on my hp4700 to do anything with tom tom i have to set the ip up as a guest. Tom tom wont load or alter itself when in the normal mode. once changes made i then go back out of guest into normal mode and it works fine then with tom tom etc

albob

Hmmm! Thats interesting - I've read somewhere else that Tomtom takes over Comm ports etc. Its something else to try -- Thanks

alan