dvd copying fault.
23 November 2004, 09:45 PM
#1
Scooby Regular
Thread Starter
Join Date: Jan 2005
Location: Lincolnshire
Posts: 15,623
Likes: 0
Received 0 Likes
on
0 Posts
dvd copying fault.
Nero and shrink,tried with three discs and an rw,two different films.
Get this everytime,cant write the lead out.it writes the rest okay,its the bit at the end.
Previously done loads before,no prob.
Heres the file,bit of a mouthful,the important bit is near the end.
Any help appreciated
User
5508-2983-4063-0598-5424-4717
Windows 98 4.90 (ME)
IA32
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 08/06/2000 17:00:00
Nero Version: 5.5.10.54
Recorder: <TOSHIBA DVD-ROM SD-R5002>Version: 1031 - HA 0 TA 1 - 5.5.10.54
Adapter driver: <ESDI_506> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <COMPAQ DVD-ROM DRD8120B>Version: 1.10 - HA 0 TA 0 - 5.5.10.54
Adapter driver: <ESDI_506> HA 0
Bus Type : default (0) -> ATAPI, detected: ATAPI
COMPAQ DVD-ROM DRD8120B (Target 0, E
: Autoinsert On, DMA On, Disconnect ?, SyncDataXfer ?
TOSHIBA DVD-ROM SD-R5002 (Target 1, F: Autoinsert On, DMA On, Disconnect ?, SyncDataXfer ?
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 39845888 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 247MB (253432kB)
Free physical memory: 5MB (5688kB)
Memory in use : 77 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On
23.11.2004
UDF/ISO compilation
19:29:29 #1 Phase 112 File dlgbrnst.cpp, Line 1655
DVD-Video files reallocation started
19:29:30 #2 Phase 114 File dlgbrnst.cpp, Line 1655
DVD-Video files reallocation completed (no file modified)
19:29:30 #3 Text 0 File Isodoc.cpp, Line 7604
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
19:29:30 #4 Phase 111 File dlgbrnst.cpp, Line 1655
DVD-Video files sorted
19:29:30 #5 Text 0 File Reader.cpp, Line 115
Reader running
19:29:30 #6 Text 0 File Writer.cpp, Line 125
Writer TOSHIBA DVD-ROM SD-R5002 running
19:29:30 #7 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)
19:29:30 #8 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)
19:29:30 #9 Text 0 File Burncd.cpp, Line 3769
Turn on Disc-At-Once, using DVD media
19:29:30 #10 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 2265120 (2265120) = #2265120/503:21.45
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
19:29:30 #11 Text 0 File DlgWaitCD.cpp, Line 229
Last possible write address on media: 2298495 (510:46.45)
Last address to be written: 2265119 (503:21.44)
19:29:30 #12 Text 0 File DlgWaitCD.cpp, Line 234
Write in overburning mode: FALSE
19:29:30 #13 Text 0 File DlgWaitCD.cpp, Line 1703
Recorder: TOSHIBA DVD-ROM SD-R5002, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193
19:29:32 #14 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder TOSHIBA DVD-ROM SD-R5002 for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD not fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 344305664
19:29:32 #15 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 2265120 (2265120) = #2265120/503:21.45
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2265120 blocks [TOSHIBA DVD-ROM SD-R5002]
--------------------------------------------------------------
19:29:32 #16 Phase 24 File dlgbrnst.cpp, Line 1655
Caching of files started
19:29:32 #17 Phase 25 File dlgbrnst.cpp, Line 1655
Caching of files completed
19:29:32 #18 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 2x (2,760 KB/s)
19:29:32 #19 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
19:29:32 #20 Text 0 File DVDR.cpp, Line 1322
Recording mode: Sequential Recording Mode for Multisession
19:29:32 #21 Text 0 File Mmc.cpp, Line 19092
Set BUFE: supported -> ON
19:29:32 #22 Text 0 File DVDR.cpp, Line 1436
Start write address at LBA 0
DVD high compatibility mode: Yes
19:29:32 #23 Text 0 File Cdrdrv.cpp, Line 7931
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
19:36:07 #24 SCSI -1135 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x04990000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x06 0xDE 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
19:36:07 #25 DVDR -1135 File Writer.cpp, Line 333
Write error
19:36:07 #26 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion
19:36:08 #27 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader
19:36:08 #28 Phase 133 File dlgbrnst.cpp, Line 1655
Writing short lead-out
19:36:08 #29 SCSI -1046 File Cdrdrv.cpp, Line 1241
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
19:36:08 #30 SCSI -1046 File Cdrdrv.cpp, Line 1241
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
19:36:08 #31 SCSI -1046 File Cdrdrv.cpp, Line 1241
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
19:36:08 #32 DVDR -1046 File WriterStatus.cpp, Line 163
Illegal medium
19:36:08 #33 TRANSFER -24 File WriterStatus.cpp, Line 163
Could not perform end of Disc-At-Once
19:36:08 #34 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 2x (2,760 KB/s)
19:36:08 #35 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 08/06/2000 17:00:00
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 11/03/2002 12:55:38
File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 05/02/2004 12:21:22
File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 05/02/2004 12:21:22
File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 05/02/2004 12:21:22
File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 08/06/2000 17:00:00
File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 08/06/2000 17:00:00
File 'IoSubsys\USBMPHLP.PDR': Ver=4.90.3000, size=4861 bytes, created 08/06/2000 17:00:00
File '..\System32\Drivers\1394bus.sys': Ver=4.90.3000.1, size=44240 bytes, created 08/06/2000 17:00:00
File '..\System32\Drivers\Ohci1394.sys': Ver=4.90.3000.1, size=49488 bytes, created 08/06/2000 17:00:00
File '..\System32\Drivers\Sbp2port.sys': Ver=4.90.3000.1, size=36336 bytes, created 08/06/2000 17:00:00
File 'IoSubsys\Disktsd.vxd': Ver=4.90.3000, size=18663 bytes, created 08/06/2000 17:00:00
Registry Keys:
Get this everytime,cant write the lead out.it writes the rest okay,its the bit at the end.
Previously done loads before,no prob.
Heres the file,bit of a mouthful,the important bit is near the end.
Any help appreciated
User
5508-2983-4063-0598-5424-4717
Windows 98 4.90 (ME)
IA32
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 08/06/2000 17:00:00
Nero Version: 5.5.10.54
Recorder: <TOSHIBA DVD-ROM SD-R5002>Version: 1031 - HA 0 TA 1 - 5.5.10.54
Adapter driver: <ESDI_506> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <COMPAQ DVD-ROM DRD8120B>Version: 1.10 - HA 0 TA 0 - 5.5.10.54
Adapter driver: <ESDI_506> HA 0
Bus Type : default (0) -> ATAPI, detected: ATAPI
COMPAQ DVD-ROM DRD8120B (Target 0, E
: Autoinsert On, DMA On, Disconnect ?, SyncDataXfer ?TOSHIBA DVD-ROM SD-R5002 (Target 1, F
: Autoinsert On, DMA On, Disconnect ?, SyncDataXfer ?Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 39845888 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 247MB (253432kB)
Free physical memory: 5MB (5688kB)
Memory in use : 77 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On
23.11.2004
UDF/ISO compilation
19:29:29 #1 Phase 112 File dlgbrnst.cpp, Line 1655
DVD-Video files reallocation started
19:29:30 #2 Phase 114 File dlgbrnst.cpp, Line 1655
DVD-Video files reallocation completed (no file modified)
19:29:30 #3 Text 0 File Isodoc.cpp, Line 7604
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
19:29:30 #4 Phase 111 File dlgbrnst.cpp, Line 1655
DVD-Video files sorted
19:29:30 #5 Text 0 File Reader.cpp, Line 115
Reader running
19:29:30 #6 Text 0 File Writer.cpp, Line 125
Writer TOSHIBA DVD-ROM SD-R5002 running
19:29:30 #7 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)
19:29:30 #8 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)
19:29:30 #9 Text 0 File Burncd.cpp, Line 3769
Turn on Disc-At-Once, using DVD media
19:29:30 #10 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 2265120 (2265120) = #2265120/503:21.45
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
19:29:30 #11 Text 0 File DlgWaitCD.cpp, Line 229
Last possible write address on media: 2298495 (510:46.45)
Last address to be written: 2265119 (503:21.44)
19:29:30 #12 Text 0 File DlgWaitCD.cpp, Line 234
Write in overburning mode: FALSE
19:29:30 #13 Text 0 File DlgWaitCD.cpp, Line 1703
Recorder: TOSHIBA DVD-ROM SD-R5002, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193
19:29:32 #14 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder TOSHIBA DVD-ROM SD-R5002 for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD not fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 344305664
19:29:32 #15 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 2265120 (2265120) = #2265120/503:21.45
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2265120 blocks [TOSHIBA DVD-ROM SD-R5002]
--------------------------------------------------------------
19:29:32 #16 Phase 24 File dlgbrnst.cpp, Line 1655
Caching of files started
19:29:32 #17 Phase 25 File dlgbrnst.cpp, Line 1655
Caching of files completed
19:29:32 #18 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 2x (2,760 KB/s)
19:29:32 #19 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
19:29:32 #20 Text 0 File DVDR.cpp, Line 1322
Recording mode: Sequential Recording Mode for Multisession
19:29:32 #21 Text 0 File Mmc.cpp, Line 19092
Set BUFE: supported -> ON
19:29:32 #22 Text 0 File DVDR.cpp, Line 1436
Start write address at LBA 0
DVD high compatibility mode: Yes
19:29:32 #23 Text 0 File Cdrdrv.cpp, Line 7931
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
19:36:07 #24 SCSI -1135 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x04990000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x06 0xDE 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
19:36:07 #25 DVDR -1135 File Writer.cpp, Line 333
Write error
19:36:07 #26 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion
19:36:08 #27 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader
19:36:08 #28 Phase 133 File dlgbrnst.cpp, Line 1655
Writing short lead-out
19:36:08 #29 SCSI -1046 File Cdrdrv.cpp, Line 1241
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
19:36:08 #30 SCSI -1046 File Cdrdrv.cpp, Line 1241
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
19:36:08 #31 SCSI -1046 File Cdrdrv.cpp, Line 1241
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
19:36:08 #32 DVDR -1046 File WriterStatus.cpp, Line 163
Illegal medium
19:36:08 #33 TRANSFER -24 File WriterStatus.cpp, Line 163
Could not perform end of Disc-At-Once
19:36:08 #34 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 2x (2,760 KB/s)
19:36:08 #35 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 08/06/2000 17:00:00
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 11/03/2002 12:55:38
File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 05/02/2004 12:21:22
File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 05/02/2004 12:21:22
File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 05/02/2004 12:21:22
File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 08/06/2000 17:00:00
File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 08/06/2000 17:00:00
File 'IoSubsys\USBMPHLP.PDR': Ver=4.90.3000, size=4861 bytes, created 08/06/2000 17:00:00
File '..\System32\Drivers\1394bus.sys': Ver=4.90.3000.1, size=44240 bytes, created 08/06/2000 17:00:00
File '..\System32\Drivers\Ohci1394.sys': Ver=4.90.3000.1, size=49488 bytes, created 08/06/2000 17:00:00
File '..\System32\Drivers\Sbp2port.sys': Ver=4.90.3000.1, size=36336 bytes, created 08/06/2000 17:00:00
File 'IoSubsys\Disktsd.vxd': Ver=4.90.3000, size=18663 bytes, created 08/06/2000 17:00:00
Registry Keys:
23 November 2004, 09:48 PM
#2
Scooby Regular
Thread Starter
Join Date: Jan 2005
Location: Lincolnshire
Posts: 15,623
Likes: 0
Received 0 Likes
on
0 Posts
btw,coincidence or not,this only started today when i tried to copy/change a region 1 onto region 2 using shrink.
since then ive tried a region2,but still no luck.
Have i changed something in nero trying a region one disc?
since then ive tried a region2,but still no luck.
Have i changed something in nero trying a region one disc?
Thread
Thread Starter
Forum
Replies
Last Post
JonMc
Subaru Parts
22
06 February 2016 09:50 PM
Danny0608
Subaru
6
27 September 2015 02:16 PM
Danny0608
Subaru Parts
0
12 September 2015 02:59 PM