dvd copying fault.
Nero and shrink,tried with three discs and an rw,two different films.
Get this everytime,cant write the lead out.it writes the rest okay,its the bit at the end. Previously done loads before,no prob. Heres the file,bit of a mouthful,the important bit is near the end. Any help appreciated User 5508-2983-4063-0598-5424-4717 Windows 98 4.90 (ME) IA32 WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 08/06/2000 17:00:00 Nero Version: 5.5.10.54 Recorder: <TOSHIBA DVD-ROM SD-R5002>Version: 1031 - HA 0 TA 1 - 5.5.10.54 Adapter driver: <ESDI_506> HA 0 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <COMPAQ DVD-ROM DRD8120B>Version: 1.10 - HA 0 TA 0 - 5.5.10.54 Adapter driver: <ESDI_506> HA 0 Bus Type : default (0) -> ATAPI, detected: ATAPI COMPAQ DVD-ROM DRD8120B (Target 0, E:): Autoinsert On, DMA On, Disconnect ?, SyncDataXfer ? TOSHIBA DVD-ROM SD-R5002 (Target 1, F:): Autoinsert On, DMA On, Disconnect ?, SyncDataXfer ? Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 39845888 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 247MB (253432kB) Free physical memory: 5MB (5688kB) Memory in use : 77 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Enabled (1) Wizard: On 23.11.2004 UDF/ISO compilation 19:29:29 #1 Phase 112 File dlgbrnst.cpp, Line 1655 DVD-Video files reallocation started 19:29:30 #2 Phase 114 File dlgbrnst.cpp, Line 1655 DVD-Video files reallocation completed (no file modified) 19:29:30 #3 Text 0 File Isodoc.cpp, Line 7604 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 19:29:30 #4 Phase 111 File dlgbrnst.cpp, Line 1655 DVD-Video files sorted 19:29:30 #5 Text 0 File Reader.cpp, Line 115 Reader running 19:29:30 #6 Text 0 File Writer.cpp, Line 125 Writer TOSHIBA DVD-ROM SD-R5002 running 19:29:30 #7 ISO9660GEN -11 File geniso.cpp, Line 4571 First writeable address = 0 (0x00000000) 19:29:30 #8 ISO9660GEN -11 File geniso.cpp, Line 4571 First writeable address = 0 (0x00000000) 19:29:30 #9 Text 0 File Burncd.cpp, Line 3769 Turn on Disc-At-Once, using DVD media 19:29:30 #10 Text 0 File ThreadedTransferInterface.cpp, Line 672 Setup items (original item values) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 2265120 (2265120) = #2265120/503:21.45 relocatable, CD pos for caching/writing not required/required, no patch infos -------------------------------------------------------------- 19:29:30 #11 Text 0 File DlgWaitCD.cpp, Line 229 Last possible write address on media: 2298495 (510:46.45) Last address to be written: 2265119 (503:21.44) 19:29:30 #12 Text 0 File DlgWaitCD.cpp, Line 234 Write in overburning mode: FALSE 19:29:30 #13 Text 0 File DlgWaitCD.cpp, Line 1703 Recorder: TOSHIBA DVD-ROM SD-R5002, Media type: DVD-R Disc Manufacturer: RITEKG - 04 Disc Application Code: 64, Disc Physical Code: 193 19:29:32 #14 Text 0 File ThreadedTransferInterface.cpp, Line 824 Prepare recorder TOSHIBA DVD-ROM SD-R5002 for write in cue-sheet-DAO DAO infos: ========== MCN: TOCTYPE: 0x0 Session Closed, CD not fixated Tracks 1 to 1: TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 344305664 19:29:32 #15 Text 0 File ThreadedTransferInterface.cpp, Line 672 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 2265120 (2265120) = #2265120/503:21.45 relocatable, CD pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2265120 blocks [TOSHIBA DVD-ROM SD-R5002] -------------------------------------------------------------- 19:29:32 #16 Phase 24 File dlgbrnst.cpp, Line 1655 Caching of files started 19:29:32 #17 Phase 25 File dlgbrnst.cpp, Line 1655 Caching of files completed 19:29:32 #18 Phase 36 File dlgbrnst.cpp, Line 1655 Burn process started at 2x (2,760 KB/s) 19:29:32 #19 Text 0 File ThreadedTransferInterface.cpp, Line 1978 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 19:29:32 #20 Text 0 File DVDR.cpp, Line 1322 Recording mode: Sequential Recording Mode for Multisession 19:29:32 #21 Text 0 File Mmc.cpp, Line 19092 Set BUFE: supported -> ON 19:29:32 #22 Text 0 File DVDR.cpp, Line 1436 Start write address at LBA 0 DVD high compatibility mode: Yes 19:29:32 #23 Text 0 File Cdrdrv.cpp, Line 7931 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 30000 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Media Specific: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 19:36:07 #24 SCSI -1135 File Cdrdrv.cpp, Line 1445 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x04990000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x06 0xDE 0xA0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 19:36:07 #25 DVDR -1135 File Writer.cpp, Line 333 Write error 19:36:07 #26 Text 0 File ThreadedTransfer.cpp, Line 222 all writers idle, stopping conversion 19:36:08 #27 Text 0 File ThreadedTransfer.cpp, Line 216 conversion idle, stopping reader 19:36:08 #28 Phase 133 File dlgbrnst.cpp, Line 1655 Writing short lead-out 19:36:08 #29 SCSI -1046 File Cdrdrv.cpp, Line 1241 SCSI Exec, HA 0, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 19:36:08 #30 SCSI -1046 File Cdrdrv.cpp, Line 1241 SCSI Exec, HA 0, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 19:36:08 #31 SCSI -1046 File Cdrdrv.cpp, Line 1241 SCSI Exec, HA 0, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 19:36:08 #32 DVDR -1046 File WriterStatus.cpp, Line 163 Illegal medium 19:36:08 #33 TRANSFER -24 File WriterStatus.cpp, Line 163 Could not perform end of Disc-At-Once 19:36:08 #34 Phase 38 File dlgbrnst.cpp, Line 1655 Burn process failed at 2x (2,760 KB/s) 19:36:08 #35 Text 0 File Scsicmd.cpp, Line 406 SCSI not using temporary buffers 20 out of 20 temporary buffers allocated Existing drivers: File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 08/06/2000 17:00:00 File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 11/03/2002 12:55:38 File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 05/02/2004 12:21:22 File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 05/02/2004 12:21:22 File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 05/02/2004 12:21:22 File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 08/06/2000 17:00:00 File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 08/06/2000 17:00:00 File 'IoSubsys\USBMPHLP.PDR': Ver=4.90.3000, size=4861 bytes, created 08/06/2000 17:00:00 File '..\System32\Drivers\1394bus.sys': Ver=4.90.3000.1, size=44240 bytes, created 08/06/2000 17:00:00 File '..\System32\Drivers\Ohci1394.sys': Ver=4.90.3000.1, size=49488 bytes, created 08/06/2000 17:00:00 File '..\System32\Drivers\Sbp2port.sys': Ver=4.90.3000.1, size=36336 bytes, created 08/06/2000 17:00:00 File 'IoSubsys\Disktsd.vxd': Ver=4.90.3000, size=18663 bytes, created 08/06/2000 17:00:00 Registry Keys: |
btw,coincidence or not,this only started today when i tried to copy/change a region 1 onto region 2 using shrink.
since then ive tried a region2,but still no luck. Have i changed something in nero trying a region one disc? |
All times are GMT +1. The time now is 12:27 PM. |
© 2024 MH Sub I, LLC dba Internet Brands