URGENT Server Blewup NT4 Help Network
#1
emailserver in work just blew,
DOA
managed to clone the hdd ages ago and stuck it in a drawer in case of emergency
flung the drive in an old box to se what i could get,
all boots up but cannot get it on the network,
this is my main server for email
wins server etc but cannot get it on the network at all, cable is good and is being picked up by hub (getting green light)
I knew this would happen said to boss we need to go server 2k3 in january.
system is
MS small business server 4.5 with sp 6a (just re-installing this at moment)
anybody got any ideas
thanks
jase
ps heating fooked in work 8 degrees in the office !!!!!!
DOA
managed to clone the hdd ages ago and stuck it in a drawer in case of emergency
flung the drive in an old box to se what i could get,
all boots up but cannot get it on the network,
this is my main server for email
wins server etc but cannot get it on the network at all, cable is good and is being picked up by hub (getting green light)
I knew this would happen said to boss we need to go server 2k3 in january.
system is
MS small business server 4.5 with sp 6a (just re-installing this at moment)
anybody got any ideas
thanks
jase
ps heating fooked in work 8 degrees in the office !!!!!!
#3
get some gloves to warm your hands then:
check you can ping outwards to other devices on the network, if you can't change the cable (just for peace of mind) then check network card speed and duplex settings then check subnet mask and default gateway (if necessary)
andy.
check you can ping outwards to other devices on the network, if you can't change the cable (just for peace of mind) then check network card speed and duplex settings then check subnet mask and default gateway (if necessary)
andy.
#4
duff network card
replaced it
we had a major power spike , took out heating and everything
think i am getting there slowly
thanks
can somebody email me some gloves
replaced it
we had a major power spike , took out heating and everything
think i am getting there slowly
thanks
can somebody email me some gloves
#5
Perhaps the port in the hub/switch has blown, try another port if you have a spare one. also check that other pc's on the same hub/switch can ping each other. perhaps the whole hub/switch has also gone.
#6
hmmm
How fooked is it??
You are reinstalling that it itself presents a whole stack of problems of getting back mail etc etc
have you got a backup if so what was used to create it?
where are you based?
How fooked is it??
You are reinstalling that it itself presents a whole stack of problems of getting back mail etc etc
have you got a backup if so what was used to create it?
where are you based?
Trending Topics
#8
based in glasgow
sorted now
basically used ghost ages ago to clone the drive,
as for the compaq server its dead , its an old pro something, there was a major spike in work nobody told me
ADT called out to replace fried boards and stuff for the alarms but as per usual IT not phoned.
only popped in by chance
jase
sorted now
basically used ghost ages ago to clone the drive,
as for the compaq server its dead , its an old pro something, there was a major spike in work nobody told me
ADT called out to replace fried boards and stuff for the alarms but as per usual IT not phoned.
only popped in by chance
jase
#9
Hey I am in Edinburgh work for a Central Scotland Based reseller.
Give us a shout if you need a new server or when you need to upgrade to 2k3 [busy doing an upgrade now for a customer]
Cheers
Give us a shout if you need a new server or when you need to upgrade to 2k3 [busy doing an upgrade now for a customer]
Cheers
#12
Scooby Regular
Join Date: Dec 2003
Location: cheshire
Posts: 1,180
Likes: 0
Received 0 Likes
on
0 Posts
jase I had this as well not long ago round a 2k dc etc, time to get some spares sorted hubs, routers, switchs etc, get some notes together & do regular backups... I learnt the hardway!..
But now I can rest assured the whole place can go up in smoke & I can get everything running again quicky..
Have since moved away from exchange, use pop boxes one less thing to look after.go wrong!
Good Look, email me if you need any help
But now I can rest assured the whole place can go up in smoke & I can get everything running again quicky..
Have since moved away from exchange, use pop boxes one less thing to look after.go wrong!
Good Look, email me if you need any help
#13
thing is its pretty much a static kind of server
only used for email and a 3rd party printing software that links into unix box.
I did do backups but it was on an internal SLR drive that came with the compaq.
Even had a backup server , tested it about a year ago , worked fine and guess what in the hour of need it would not power up
only used for email and a 3rd party printing software that links into unix box.
I did do backups but it was on an internal SLR drive that came with the compaq.
Even had a backup server , tested it about a year ago , worked fine and guess what in the hour of need it would not power up
#14
I have seen this problem before on NT4. The only way I have fixed it before is to remove the network from the network properties. Also remove the card from the Hardware configuration in Control panel (Make sure you have all the drivers and the like before hand)
Reinstall the card after a reboot. 90% chance that this will fix your problem. If this does not work do the same again AND change the NIC.
Reinstall the card after a reboot. 90% chance that this will fix your problem. If this does not work do the same again AND change the NIC.
#15
The UPS was not doing its job then, I'd think about a better one
It should be more than capable of handling a large power spike. Ones we have at work a so huge, even some of the desktop ones feel like they have concrete bricks in them
It should be more than capable of handling a large power spike. Ones we have at work a so huge, even some of the desktop ones feel like they have concrete bricks in them
Thread
Thread Starter
Forum
Replies
Last Post
IWatkins
ScoobyNet General
1
24 October 2000 10:46 AM