NT4 help.....
#1
Scooby Regular
Thread Starter
Join Date: Aug 2002
Location: Sodding Chipbury
Posts: 2,702
Likes: 0
Received 0 Likes
on
0 Posts
I'm hoping someone can help me out here (it's a long time since I've done anything with MS stuff )
Basically I've a customer NT4 server box with 2 18gb scsi disks setup with 2 mirrored partitions and 1 stripe set (all through disk administrator)
There is what appears to be a disk problem somewhere along the line, the server thinks the c drive is 'dirty', whenever you run a scandisk or chkdsk against it, it reboots. Letting it run a scandsik during startup results in a reboot too.
No software has been installed on it for ages, no entries in the error log apart from the helpful 'last system shutdown was unexpected' and no, before anyone suggests it, it hasn't got the w32.blaster (or any other for that matter) virus.
Any ideas / tips on narrowing down the problem any further much appreciated.
Basically I've a customer NT4 server box with 2 18gb scsi disks setup with 2 mirrored partitions and 1 stripe set (all through disk administrator)
There is what appears to be a disk problem somewhere along the line, the server thinks the c drive is 'dirty', whenever you run a scandisk or chkdsk against it, it reboots. Letting it run a scandsik during startup results in a reboot too.
No software has been installed on it for ages, no entries in the error log apart from the helpful 'last system shutdown was unexpected' and no, before anyone suggests it, it hasn't got the w32.blaster (or any other for that matter) virus.
Any ideas / tips on narrowing down the problem any further much appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
Puff The Magic Wagon!
Computer & Technology Related
15
02 August 2002 12:53 PM