What speed Barton ??
#3
Scooby Regular
Thread Starter
Join Date: Jul 2002
Location: Under your bonnet
Posts: 9,173
Likes: 0
Received 0 Likes
on
0 Posts
Phew,
mate was trying to tell me it was 3200mhz [img]images/smilies/mad.gif[/img]
Steve,
As for your Q's about getting Dual channels working,
Yes, when the clock was left at 2205Mhz (200x11) Si Sandra reports it as
"200FSB dual mode enabled (2x200)".
But when clocked to 2305mhz (200x11.5) Si Sandra seems to go all screwy and report Motherboard temps of 255 deg C, yes, deg C
and also not showing the dual channel mode either. even more
Any help?
Andy
mate was trying to tell me it was 3200mhz [img]images/smilies/mad.gif[/img]
Steve,
As for your Q's about getting Dual channels working,
Yes, when the clock was left at 2205Mhz (200x11) Si Sandra reports it as
"200FSB dual mode enabled (2x200)".
But when clocked to 2305mhz (200x11.5) Si Sandra seems to go all screwy and report Motherboard temps of 255 deg C, yes, deg C
and also not showing the dual channel mode either. even more
Any help?
Andy
#4
Scooby Regular
iTrader: (8)
id just leave cputo run as normal, less hassle and the board is brand new so when the faster bartons come out should be able to pop in one of the better ones hopefully without changing boards
toms hard ware shows how to get the cpu to run at 2500mhz but ive been told it looks dodgy
[Edited by stevebt - 8/8/2003 9:09:46 PM]
toms hard ware shows how to get the cpu to run at 2500mhz but ive been told it looks dodgy
[Edited by stevebt - 8/8/2003 9:09:46 PM]
#5
Scooby Regular
Join Date: Dec 2002
Location: Sunny BELFAST
Posts: 19,408
Likes: 0
Received 0 Likes
on
0 Posts
/pedant mode on
3200+ barton actually runs at 2.167 GHz anything faster than this will show up as a 3200+ e.g. 2500+ barton (normal running 11x166=1.83 Ghz) overclocked by upping FSB to 200Mhz you have 200x11=2.2 Ghz. reasonable overclock for 60 quid, when you consider the price of a pukka 3200+.
cheers
sinky (still not got me dual channel mode to work)
3200+ barton actually runs at 2.167 GHz anything faster than this will show up as a 3200+ e.g. 2500+ barton (normal running 11x166=1.83 Ghz) overclocked by upping FSB to 200Mhz you have 200x11=2.2 Ghz. reasonable overclock for 60 quid, when you consider the price of a pukka 3200+.
cheers
sinky (still not got me dual channel mode to work)
#6
Scooby Regular
iTrader: (8)
thats the 3000xp that runs at that mhz
here you go
forgot how to do the clicky links
[Edited by stevebt - 8/8/2003 9:34:11 PM]
[Edited by stevebt - 8/8/2003 9:34:30 PM]
[Edited by stevebt - 8/8/2003 9:37:48 PM]
here you go
forgot how to do the clicky links
[Edited by stevebt - 8/8/2003 9:34:11 PM]
[Edited by stevebt - 8/8/2003 9:34:30 PM]
[Edited by stevebt - 8/8/2003 9:37:48 PM]
#7
Scooby Regular
Join Date: Dec 2002
Location: Sunny BELFAST
Posts: 19,408
Likes: 0
Received 0 Likes
on
0 Posts
well now don't i look silly, what a numptie. could have sworn it was 2.167 but i stand corrected. wrists duly slapped and i will make sure in future to ensure my advice/opinions can at least be backed up with hard evidence
oh btw dual channel still don't work
cheers
sinky
oh btw dual channel still don't work
cheers
sinky
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM