Compaq ML370 G2 - Hangs during W2000 Server install
Have done all the SmartStart borrocks prior to installing W2000.
Done F6 and added the Compaq SA 5i driver. It partitions up fine, copies the files and reboots into the GUI setup.
Gets about 60% of the way into detecting devices and hangs.
Have unplugged the DDS drive, nothing else I can remove option wise. Flashed the BIOS but no difference.
Suggestions?
Done F6 and added the Compaq SA 5i driver. It partitions up fine, copies the files and reboots into the GUI setup.
Gets about 60% of the way into detecting devices and hangs.
Have unplugged the DDS drive, nothing else I can remove option wise. Flashed the BIOS but no difference.
Suggestions?
Scooby Regular
Joined: Nov 2001
Posts: 15,239
Likes: 1
From: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
try partitioning with dos / fat... then convert to ntfs later...
Had this before... cant remember exactly...
Flash the controller bios?
Scsi termination...
erm...
erm..
David
Had this before... cant remember exactly...
Flash the controller bios?
Scsi termination...
erm...
erm..
David
Thread
Thread Starter
Forum
Replies
Last Post




