Sonic Wall Box is it Knacked?
Thread Starter
Scooby Regular
Joined: Nov 2001
Posts: 15,239
Likes: 1
From: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Just been given a sonic wall box which had a blown psu and surface mount fuse.... I replaced the surface mount fuse with A slightly larger external fuse 
However the Lan Link light stays lit.. Do you reckon its off in the bin now?
David
Edited to add that slightly larger only means physical size!
[Edited by David_Wallis - 7/22/2002 7:58:36 PM]
However the Lan Link light stays lit.. Do you reckon its off in the bin now?David
Edited to add that slightly larger only means physical size!
[Edited by David_Wallis - 7/22/2002 7:58:36 PM]
Scooby Regular
Joined: Oct 2000
Posts: 1,013
Likes: 0
David - ours did this so someone here soldered the fuse connections with wire instead of the fuse, and it works fine now.
Ours doesn't like heat, and can play up when it gets very hot... doh, firewall, heat
Simon.
Ours doesn't like heat, and can play up when it gets very hot... doh, firewall, heat
Simon.
Thread Starter
Scooby Regular
Joined: Nov 2001
Posts: 15,239
Likes: 1
From: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
dont know... no model number on it... just a small box size of mini hub... two rj45s external 5v psu... reset button on the back... make any sense?
I replaced the fuse with a normal sized fuse with some wire soldered to the end of it... it powers up but... was wondering if they can be re flashed or something
David
I replaced the fuse with a normal sized fuse with some wire soldered to the end of it... it powers up but... was wondering if they can be re flashed or something
David
Scooby Regular
Joined: Nov 2000
Posts: 2,021
Likes: 1
From: 412 Wheel HP Audi RS4
You can set it back to factory defaults ....
With the power off press and hold the reset button, power on the box and wait .....wait.....once the test light goes out you can release the button....
The default lan IP address is 192.168.168.168
HTTP to the box and then use userid admin with a blank password.
Jeff
With the power off press and hold the reset button, power on the box and wait .....wait.....once the test light goes out you can release the button....
The default lan IP address is 192.168.168.168
HTTP to the box and then use userid admin with a blank password.
Jeff
Trending Topics
Scooby Regular
Joined: Jun 2000
Posts: 13,735
Likes: 0
Just been given a sonic wall box which had a blown psu and surface mount fuse.... I replaced the surface mount fuse with A slightly larger external fuse
...wait for the bang
:P
Thread Starter
Scooby Regular
Joined: Nov 2001
Posts: 15,239
Likes: 1
From: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Nick.. p1ss off... its just I have more of the conventional sized fuses.... better than a nail or a bit of wire.. especially if your just testing and expect it to blow again!
David
Ps... Cheers Jeff
Edited to add smiles
[Edited by David_Wallis - 7/23/2002 1:38:05 PM]
[Edited by David_Wallis - 7/23/2002 1:38:27 PM]
its just I have more of the conventional sized fuses.... better than a nail or a bit of wire.. especially if your just testing and expect it to blow again! David
Ps... Cheers Jeff
Edited to add smiles
[Edited by David_Wallis - 7/23/2002 1:38:05 PM]
[Edited by David_Wallis - 7/23/2002 1:38:27 PM]
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM