Patch PAnel
12 June 2002, 10:51 AM
#1
Scooby Regular
Thread Starter
Join Date: Feb 2002
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
Looking for some help/Advice. We are moing offices and I want to add a few more ports. There is one patch panel with 24 ports on (rack mounted) but all are used and ideally I would like a few more. I have been trying to find a cheap Patch panel, but most seem to be about £100. Is this the going rate or can I get one cheaper and if so from where?
Thanks,
Thanks,
12 June 2002, 02:02 PM
#3
Scooby Regular
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
told you they were cheap... really good service and quality... rj45's are about 2 or 3p each..
David
David
06 December 2002, 12:58 PM
#6
Scooby Regular
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
www.minitran.co.uk they do a mini 5 range which was quite cheap... no connection... price is dependant on no of ports, standard, shielded / non shielded and cable management at the rear...
David
[Edited by David_Wallis - 6/12/2002 12:59:01 PM]
David
[Edited by David_Wallis - 6/12/2002 12:59:01 PM]
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM