wrxsti280

iTrader: (6)

Ok guys, looking for any products that will cut throu the crap under the arches with ease, tried autoglym engine cleaner and pre mixed wonder wheels in spray bottle, with limited success, so wondered if anyone had any tips, im planning on getting it back to the body colour and laquering several coats to give protection and shine.

Any help appreciated

SwissTony

iTrader: (19)

There is only way to do this and that is with wire brush, engine degreaser, loads of water, pressure washer, more hard bristle brushes, elbow grease, a whole day to do it and plenty of patience

See here

http://www.polishedswiss.com

Stevesbluewrx

iTrader: (4)

I used a mix or APC, R222 , hard brush and water.


Steve

wrxsti280

iTrader: (6)

Cheers guys, looks like ELbow grease is the only way forward...

addi monster

iTrader: (6)

imho i would leave it as paint will chip and rust where the underseal is soft so it protects,. but hey its your motor,.

brocks

iTrader: (3)

Clean, then reseal with stone chip guard IMHO

F1 CJE UK

iTrader: (8)

A good APC and a brush...

King Eric

As already mentioned. A good brush and some hot water with a good quality APC. I'd recommend Autosmart G101.