Inner arches
 

Ok guys, looking for any products that will cut throu the crap under the arches with ease, tried autoglym engine cleaner and pre mixed wonder wheels in spray bottle, with limited success, so wondered if anyone had any tips, im planning on getting it back to the body colour and laquering several coats to give protection and shine.

Any help appreciated

There is only way to do this and that is with wire brush, engine degreaser, loads of water, pressure washer, more hard bristle brushes, elbow grease, a whole day to do it and plenty of patience

See here

http://www.polishedswiss.com

I used a mix or APC, R222 , hard brush and water.


Steve

Cheers guys, looks like ELbow grease is the only way forward...

imho i would leave it as paint will chip and rust where the underseal is soft so it protects,. but hey its your motor,.

Clean, then reseal with stone chip guard IMHO

A good APC and a brush...

http://i79.photobucket.com/albums/j1...K/IMG_8238.jpg

http://i79.photobucket.com/albums/j1...K/IMG_8243.jpg

As already mentioned. A good brush and some hot water with a good quality APC. I'd recommend Autosmart G101.