Any tips on cleaning the engine and bay,it's looking pretty grimey.
I know it's not reccomended to jet wash so what can I do...thanks...

 

Cover alternator, intercooler, alarm and obvious electics. Soak in your choice of cleaner...Gunk, Daisy etc. Allow to penetrate the grime, agitate with a brush. Rinse with a low pressure hose. Repeat as necessary. Allow engine to idle for 10 mins, bonnet down. Apply rubber / vinyl dressing. Go for a drive.
Lift bonnet, admire and savour. Drop bonnet and relax

 

Just what I needed to hear..soon to be sorted,thanks....

 

If its really bad Gunk will do the trick. Agitate stubborn dirt with a brush then pressure wash at a low setting. Done mine over 2 years ago and have had no problems at all. I left to dry with the engine running then once cooled sprayed the whole engine bay with Swissvax Motor Shine which seals everything and disperses any moisture left. Only needs a quick wipe down now.

 

Where might one purchase swissvax motor shine...cheers.

 

HERE mate.

 

Some pics. As said cleaned with Gunk and sealed with Motor Shine.

 

That is clean..
I'll do some b4 and after shots when |I do it,cheers for the help...