Hi guys I have a 2004 notturbo 2.0 manual awd blobeye impreza and thegearbox has decided to spontaniously implode anyway this is the code on the box (92-ty754vs4aa) my problem is im finding it hard and very expensive to get one of this exact model. Is there any other box thatwill fit thats easier to find ordoes anyone have any other idea.

Thanks for reading

 

Afternoon mate, I'd contact Scott at scoobyspares. I think the 5 speed wrx should fit but he will be able to help I'm sure. Adam

 

Match to rear diff, surely turbo has different ratios etc wouldnt be compatiable

 

Thanks for the input guys. I've messages scooby spares and am awaiting a reply. Fingers crossed. I've found an exact match but they want £700 for it and I have no idea of condition which is a joke. I'm hoping there is a more generic one that fits that will only cost a couple of hundred at most. Wishful thinking huh

 

Have you spoke to API

 

Api? Sorry I'm new to this world :/

 

API at Warwick.Dave the boss gets on here

 

http://bit.ly/140tDUz

Would this fit by any chance? I'm waiting for a response from the seller to find out the model number

 

Sorry folks, Thanks for the recommendations BUT, we have no relevant info for non turbo cars or boxes. So the best advice is to buy exactly the same serial code number, as anything else will be a guess.

We do find that the non turbo boxes [ when we've needed to go looking for them ] are expensive. Probably due to lack of availablity.

Good Luck, sorry we cannot help.

David

 

Could I not use a turbo box and rear diff if my shafts and prop would fit?

 

Try

http://www.hdcsubaru.com/

dunx

 

Usually, from what we have seen here, a non turbo has a cable clutch box and no hydraulic clutch box will fit without major surgery.

David APi

 

Pretty sure mine is a hydraulic clutch. It's got a lil slave cylinder thing on the top of the box which has 2 bolts holding it on. In fact I'm sure it is.

 

If that is the case then any turbo gearbox and diff pair will do.

David

 

Will my driveshafts and prop fit it to turbo box and diff. If so I'm gonna be a very happy chappy

 

Any idea if non turbo prop and shaft would fit turbo box and diff?

 

Any idea if my shafts will fit turbo box and diff?