hi i have just stript my scooby down and out to get on with my full rebuild and it looks like it has been patched up in the rear quarter passengers side it looks good from the out side but when you look in the bot you can see the bad bits
like the inner wheel arch and the back seat support are bent and it looks like some one has had a go at straightening them And i have had a good look at it and there is rust wear the rear quarter has been welded and i have taken my side skirt off i can see wear the rear quarter was welded to the door seal as it has rustid out and ther is a big fu-- ing howll ther need to no is it worth me sorting it or not as i can do the welding at home but just not no wear to get the body parts form and i am well f off wive this hope someone can help i do have pics but dont no how to put them up and the car is a 95 sti

Sorry for the spellings but am dislektik

Need some advice pleas help me out

 

Under the patio


Whoops wrong forum

 

 

Is ther no one that can let me no wear to get body parts I need from pleas help me

 

the rear inner and outer arches are very very hard to get hold of. i did find some in america for 300 each, so if your doing both sides its 4x300 plus shipping then you have to get them fitted and sprayed.

 

No mate just the off side can I cut them off a old car that has had a front end crash mate and do you no wear I can get the door seal you no the one that runs from the front to the back of the car rear the side skirts go mate

 

Is this what you mean?
http://opposedforces.com/parts/impre...llustration_1/

those are the outer skins, below is the inner skins.
http://opposedforces.com/parts/impre...llustration_1/

you could cut the skins off another as thats what ive done on my 93wrx.

 

Yes mate ther the parts