Notices
ScoobyNet General General Subaru Discussion

Help and advice please

Thread Tools
 
Search this Thread
 
Old Feb 14, 2012 | 09:11 PM
  #1  
comrade mackie's Avatar
comrade mackie
Thread Starter
Scooby Regular
 
Joined: Feb 2012
Posts: 89
Likes: 0
From: Leeds
Default Help and advice please

Comrades,

Today i changed both rocker cover gaskets and the plugs today on my wrx that I picked up on sunday.

The car was and still is leaking oil that is burning on the exhaust manifold.


After changing the gaskets the car is still leaking oil, the rocker covers are bone dry so we can now rule that out.

The leak is significantly worse when the car is driven in a more spirited manor resulting plenty of smoke from beneath the airbox/ o/s head.

I had the cover of the cam shaft to see if the camshaft seals were leaking but they are ok.

It seems to be from the back of the o/s head and it is landing on the mani heatsheild covers.

The plugs were a lovely sandy brown colour, the coolant is clean and both top ends were clean so it doesn't point to the head.


Please help and advice as to what could be leaking, are there any problems with the turbo oil feed/return pipe? are there any gaskets on the rear of the head for sensors etc?


I need this fixed as this is my main car, i'm going to take the heatshield off on sunday to have a better look but please tell be the common places where these beauty's leak engine oil from.
Reply
Old Feb 14, 2012 | 09:22 PM
  #2  
giz1978's Avatar
giz1978
Scooby Regular
iTrader: (5)
 
Joined: Apr 2011
Posts: 883
Likes: 0
From: Stoke on trent
Default

it is the rocker cover not sealed. you need to use good silcone on top of the gasket and they have to be clean enought to eat you dinner off them lol. plus you have to re seal the half moons at the same.
Reply
Old Feb 14, 2012 | 09:29 PM
  #3  
comrade mackie's Avatar
comrade mackie
Thread Starter
Scooby Regular
 
Joined: Feb 2012
Posts: 89
Likes: 0
From: Leeds
Default

Yes I used rtv Sealer on it and the faces were cleaned with a blade.
Reply
Old Feb 14, 2012 | 09:44 PM
  #4  
giz1978's Avatar
giz1978
Scooby Regular
iTrader: (5)
 
Joined: Apr 2011
Posts: 883
Likes: 0
From: Stoke on trent
Default

is it both sides or just the one??
Reply
Old Feb 14, 2012 | 09:48 PM
  #5  
comrade mackie's Avatar
comrade mackie
Thread Starter
Scooby Regular
 
Joined: Feb 2012
Posts: 89
Likes: 0
From: Leeds
Default

just o/s.
Reply
Old Feb 14, 2012 | 09:50 PM
  #6  
stu turbo 98's Avatar
stu turbo 98
Scooby Regular
iTrader: (6)
 
Joined: Jul 2008
Posts: 573
Likes: 0
From: middlesex
Default

I would bet on the oil feed pipe ,mine does the same thing,they are a pain to get to aswell.
Reply
Old Feb 14, 2012 | 09:53 PM
  #7  
comrade mackie's Avatar
comrade mackie
Thread Starter
Scooby Regular
 
Joined: Feb 2012
Posts: 89
Likes: 0
From: Leeds
Default

Its not drivable as the smoke is to bad it stinks! It has to be done.

Whats involved?
Reply
Old Feb 14, 2012 | 09:55 PM
  #8  
addi monster's Avatar
addi monster
Scooby Regular
iTrader: (6)
 
Joined: Feb 2010
Posts: 4,509
Likes: 0
From: north of the south border
Default

check the turbo oil feed pipe and the turbo drain pipe, apart from the rocker these are pretty much the only thing`s that will leak in that area,.
Reply
Old Feb 14, 2012 | 10:15 PM
  #9  
comrade mackie's Avatar
comrade mackie
Thread Starter
Scooby Regular
 
Joined: Feb 2012
Posts: 89
Likes: 0
From: Leeds
Default

Aye, i'll give it a gander.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
just me
Non Scooby Related
26
Jan 3, 2020 11:12 AM
Sam Witwicky
Engine Management and ECU Remapping
17
Nov 13, 2015 10:49 AM
scoobhunter722
ScoobyNet General
52
Oct 20, 2015 04:32 PM
Phil3822
General Technical
0
Sep 30, 2015 06:29 PM
paddyscoob
General Technical
10
Sep 30, 2015 03:51 PM




All times are GMT +1. The time now is 11:08 PM.