When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
its been mapped to a ver-6 sti with little mods to 330/330.. L/C only engages if you put in 1st gear and floor the throttle, A/L is on a switch... with minor map tweeks it should run fine..
was mine
its been mapped to a ver-6 sti with little mods to 330/330.. L/C only engages if you put in 1st gear and floor the throttle, A/L is on a switch... with minor map tweeks it should run fine..
was mine
Well my rebuild is standard uk but with comp bearings and gaskets, it has a cat back, and will look at upgrading the td04 to a vf i think, plus walbro pump, how much does it cost to map one of them?
then it will work fine with a map. you will have to speak to a local mapper on price or i think steve will map it on the rollers cheaper as i bought it off him.. you can turn both a/l and l/c off completely.. you can also run 2 maps for fuel etc.. i also have 1 on my hawk spec-c ra