Ive got a 07 plate Hawkeye WRX
is the stud pattern a 5X110 or 5X114
keep reading conflicting adverts on ebay that have confused me
from what ive read it would appear that the Hawkeye WRX is 5X110 but the STI is 5X114
could anyone please give me the definitive on this as im bidding on a set of wheels that are 5X114 and im not sure they will fit albeit they say they are for a Hawkeye

 

STI from 2005 have 114 pcd, wrx has 100.

Tony

 

Tony thanks mate ill bid on them now I know that my car is 5X110

 

The PCD is 114.3

They changed it to that size on the last of the Blobs before bringing out the Hawkeye which kept that same PCD.

To be absolutely certain take a tape measure and measure from the centre of one of your wheel nuts across the hub. It should read 114.3mm.

 

He has a wrx and not an STI, wrx's have 100pcd.

Tony

 

oops

 

Sorry to hi-jack your thread but I have a 03 (blob) sti what would be the pcd on it? thanks

 

**** that had me going for a min ive bid on the wheels now
Phew

 

100

 

03STi is PCD 100mm, this was changed to 114.3 in 2005 on some of the last blob STi only before the Hawkeye STi which continued at 114.3. Non STi cars remain 100 PCD regardless. (no such thing as 110).

 

All WRX's have 100/5 PCD
The DCCD STi's (circa 2005-) have 114.3/5

For interest sake, 114.3mm = 4.5 inches

 

If you've bid on wheels that are 5x110 then I hope you've got a vauxhall to put them on!

 

No cocked the typing up they are 5X100
thanks for all the replys fellas

 

So my STI is 100 then thanks

 

Is it a blobeye I assume?
Does it have A-DCCD?
Does it have arch extensions on the rear?

More info needed to avoid a c*ck-up.

 

no mate it doesnt have DCCD its an 03 plate as stated in a earlier post

 

Won them thanks to the info from you guys
Thought these were well cheap cant wait to get them and get some GILD paint on them !!!!

http://cgi.ebay.co.uk/ws/eBayISAPI.d...torefresh=true

 

Read these again

 

Dont need to read them again mate the pcd for an 03 sti plate is 100