decat exhaust help

Reply Subscribe

Thread Tools

Search this Thread

Feb 16, 2010 | 07:10 PM

peterg60

Thread Starter

Scooby Regular

Joined: Dec 2009

Posts: 189

Likes: 0

From: birmingham

decat exhaust help

hi all fitting my full decat exhaust in a bit, and on the downpipe there are two holes pitures below what goes in these holes of the original exuast cheers 2005 wrx

Last edited by peterg60; Feb 16, 2010 at 07:12 PM.

Feb 16, 2010 | 07:13 PM

scoobybry!

Scooby Regular

iTrader: (2)

Joined: Aug 2009

Posts: 597

Likes: 0

From: ukscoobies.com

There lamber sensor holes ! What scooby you got?

www.notinghamshirescoobies.com

Feb 16, 2010 | 09:49 PM

peterg60

Thread Starter

Scooby Regular

Joined: Dec 2009

Posts: 189

Likes: 0

From: birmingham

i got a 2005 wrx turbo

Feb 16, 2010 | 09:52 PM

scoobybry!

Scooby Regular

iTrader: (2)

Joined: Aug 2009

Posts: 597

Likes: 0

From: ukscoobies.com

well depending on how many lamber sense's there are on your car you put them in the holes provided. If you only have one you put a bolt in the other to blank it off.

www.nottinghamshirscoobies.com

Feb 16, 2010 | 09:59 PM

peterg60

Thread Starter

Scooby Regular

Joined: Dec 2009

Posts: 189

Likes: 0

From: birmingham

the top piture a bolt will go in but the bottom piture i ant got clue i hope i got 2 lambo sensors

Feb 16, 2010 | 10:06 PM

scoobybry!

Scooby Regular

iTrader: (2)

Joined: Aug 2009

Posts: 597

Likes: 0

From: ukscoobies.com

think you have mate. put a thred up on Nottinghamshire Scoobies they will answer any questions like that better than me mate

Feb 16, 2010 | 10:09 PM

Dubzy

Scooby Regular

iTrader: (4)

Joined: May 2009

Posts: 979

Likes: 3

From: In the middle

looks same as mine on 2004wrx. mine has the lambda fitted in the lower hole and blanking plug blocks off the hole near the turbo end.

Trending Topics

CV boot replacement.

19

707
Little project i done V1 JDM STI TMIC using V1 inlet manifold

2

85
MY99 Wagon-water in spare wheel well!

6

220
Duplicate post ignore!

1

75
Heater Matrix

4

154

Feb 16, 2010 | 10:20 PM

peterg60

Thread Starter

Scooby Regular

Joined: Dec 2009

Posts: 189

Likes: 0

From: birmingham

So i have to block the top hole? Do i use a normal bolt? Does any 1 know the size

Feb 17, 2010 | 12:48 AM

Dubzy

Scooby Regular

iTrader: (4)

Joined: May 2009

Posts: 979

Likes: 3

From: In the middle

Quote:

Originally Posted by peterg60

So i have to block the top hole? Do i use a normal bolt? Does any 1 know the size

your picture looks like it has a blanking plug in bottom hole. If so just take it out and put it in the top hole.

Feb 17, 2010 | 05:29 AM

#10

peterg60

Thread Starter

Scooby Regular

Joined: Dec 2009

Posts: 189

Likes: 0

From: birmingham

Quote:

Originally Posted by Dubzy

your picture looks like it has a blanking plug in bottom hole. If so just take it out and put it in the top hole.

ok cheers for that thanks

Feb 17, 2010 | 06:37 AM

#11

midnight

Scooby Regular

iTrader: (10)

Joined: Oct 2009

Posts: 2,321

Likes: 1

From: Coventry

I think you will find you have 1 lambada sensor and the downpipe has catered for both locations .On an early import you blank them off, on a classic it tends to be the top one,and on newage the bottom one