|
decat exhaust help
hi all fitting my full decat exhaust in a bit, and on the downpipe there are two holes pitures below what goes in these holes of the original exuast cheers 2005 wrx
http://img94.imageshack.us/img94/192/16022010073.jpg http://img404.imageshack.us/img404/9682/16022010076.jpg http://img502.imageshack.us/img502/6504/16022010075.jpg |
|
i got a 2005 wrx turbo
|
well depending on how many lamber sense's there are on your car you put them in the holes provided. If you only have one you put a bolt in the other to blank it off.
www.nottinghamshirscoobies.com |
the top piture a bolt will go in but the bottom piture i ant got clue i hope i got 2 lambo sensors
|
think you have mate. put a thred up on Nottinghamshire Scoobies they will answer any questions like that better than me mate
|
looks same as mine on 2004wrx. mine has the lambda fitted in the lower hole and blanking plug blocks off the hole near the turbo end.
|
So i have to block the top hole? Do i use a normal bolt? Does any 1 know the size
|
Originally Posted by peterg60
(Post 9229485)
So i have to block the top hole? Do i use a normal bolt? Does any 1 know the size
|
Originally Posted by Dubzy
(Post 9229749)
your picture looks like it has a blanking plug in bottom hole. If so just take it out and put it in the top hole.
ok cheers for that thanks |
I think you will find you have 1 lambada sensor and the downpipe has catered for both locations .On an early import you blank them off, on a classic it tends to be the top one,and on newage the bottom one
|
| All times are GMT +1. The time now is 09:21 AM. |
© 2024 MH Sub I, LLC dba Internet Brands