Whats the first thing to do-Whats the cost?
Thread Starter
Scooby Regular
Joined: Jun 2008
Posts: 43
Likes: 0
From: Chelmsford
Whats the first thing to do-Whats the cost?
Hello
Just a bit of advice needed.
What should i do to Impreza 2.5 wrx (Hawkeye) Saloon.
Engine:
Body:
Would like to get around 300 BHP
Any idea's welcome
Just a bit of advice needed.
What should i do to Impreza 2.5 wrx (Hawkeye) Saloon.
Engine:
Body:
Would like to get around 300 BHP
Any idea's welcome
Last edited by yeehaa customs; Jul 25, 2009 at 09:45 PM.
Decat, remap and uprated fuel pump should see around 280 to 290 with well over 320lb ft of torque.
22 or 24 mm rear anti roll bar,solid droplinks, Eibach lowering springs or coilovers if you do track work
Uprated discs, pads, DOT 5.1 fluid and braided hoses.
HT autos splitter for the front end
Very quick and useable road car
22 or 24 mm rear anti roll bar,solid droplinks, Eibach lowering springs or coilovers if you do track work
Uprated discs, pads, DOT 5.1 fluid and braided hoses.
HT autos splitter for the front end
Very quick and useable road car
Thread Starter
Scooby Regular
Joined: Jun 2008
Posts: 43
Likes: 0
From: Chelmsford
Decat, remap and uprated fuel pump should see around 280 to 290 with well over 320lb ft of torque.
22 or 24 mm rear anti roll bar,solid droplinks, Eibach lowering springs or coilovers if you do track work
Uprated discs, pads, DOT 5.1 fluid and braided hoses.
HT autos splitter for the front end
Very quick and useable road car
22 or 24 mm rear anti roll bar,solid droplinks, Eibach lowering springs or coilovers if you do track work
Uprated discs, pads, DOT 5.1 fluid and braided hoses.
HT autos splitter for the front end
Very quick and useable road car
What sort of price will this cost me?(For the Decat,remap fuel pump)
i have a 2.5 wrx with a full decat, sti tmic, air intake, walbro fuel pump and a remap by bob rawle and saw near 280 with 340 ft/lb torque
but the remap alone cost 850 pounds which i duno how i was charged that much it was with sti tuning with bob rawle and that was only remapping my standard ecu not a new ecu
but the remap alone cost 850 pounds which i duno how i was charged that much it was with sti tuning with bob rawle and that was only remapping my standard ecu not a new ecu
Last edited by uk300scoob; Jul 26, 2009 at 01:52 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM