Hi
I'm planning to fit a Perrin ALK this weekend, I have small car ramps to run the car up on. Will this work or does the wheel need to be clear of the ground for the fitting?
Thanks for any help

 

your gonna need the wheels off the ground because you need to remove the bolts from the lower arm and it will be very hard to re-fit them with the wheels on your ramps, really want it on axle stands mate.

 

OK thanks for that

 

remember to get the alignment set up afterwards

 

There's a local motorsport garage which has an advanced re-set for performance cars costing £67. TSL Motorsport have quoted 165+vat for a 4wheel laser alighnment. I'm tempted to save money but would it prove false economy?
Thanks again

 

Think i only paid £65 from Powerstation and then re-applied by Dastek for about £55.

 

£165 + VAT is a bit steep. I paid £120 all in for mine.

 

Can you let me know what the kit was like to fit please. I've got the very same kit in my garage to fit to mine when I get round to it.

Wolfie.

 

Yes will do, although I can forsee it testing my limited technical knowhow, (prob all day of a job)
Thanks for the inputs chaps, I'll take the cheaper option.
cheers

 

if you go on my project 05 newage mickyjeff i have fitted the perrin gear to mine. scroll though and find it. it will help might take a couple of days the bolts are mega tight and take of the bottom y frame. its a lot easier to get the anti lift kit on, best of luck with it
mickyjeff.

 

Thanks, found it. Thinks I'm going to put the car up the ramps and have a good look around to get a clearer picture. Got plenty of information about it now.
Regards