Coil pack issue (im a bit confused)
Thread Starter
Scooby Regular
iTrader: (7)
Joined: Jan 2001
Posts: 3,695
Likes: 1
From: Chester (Tumbleweed City!)
i have/had a problem with the CEL flashing and then staying on, i say had as the light is off at the moment!
connected a laptop and 3 error codes indicated misfires on 3 cylinders
spark plugs are 2k miles old and are ok so i bought 4 new packs
i changed them and the car would not start??
put the old packs back on and the car starts
the old and the new packs have the same part number FK0140-12v strange or what?
someone has told me that some types of packs are programmable could the ones i have be for another scoob version??
BTW MY02 wrx
thanks
steve
connected a laptop and 3 error codes indicated misfires on 3 cylinders
spark plugs are 2k miles old and are ok so i bought 4 new packs
i changed them and the car would not start??
put the old packs back on and the car starts
the old and the new packs have the same part number FK0140-12v strange or what?
someone has told me that some types of packs are programmable could the ones i have be for another scoob version??
BTW MY02 wrx
thanks
steve
Thread Starter
Scooby Regular
iTrader: (7)
Joined: Jan 2001
Posts: 3,695
Likes: 1
From: Chester (Tumbleweed City!)
thought of that

its just that the engine made no attempt at starting/firing with all four so i swapped 2 packs on one side and it ran, but very rough
is there anyway of testing the packs off the car?
thanks
steve

its just that the engine made no attempt at starting/firing with all four so i swapped 2 packs on one side and it ran, but very rough
is there anyway of testing the packs off the car?
thanks
steve
Former Sponsor
iTrader: (4)
Joined: Jan 2001
Posts: 16,548
Likes: 2
From: ECU Mapping - www.JollyGreenMonster.co.uk
cannot help with the new coil packs... not sure if you want to hear this but the misfire code is possibly related to the neutral position sensor.. try logging the nps on the laptop.. see if it flicks to neutral whilst driving in gear..
Simon
Simon
Thread Starter
Scooby Regular
iTrader: (7)
Joined: Jan 2001
Posts: 3,695
Likes: 1
From: Chester (Tumbleweed City!)
hi simon
the laptop gave 3 specific codes misfires on pistons 2, 3 and 4
cant remember the codes (numbers) exactly
steve
BTW the car somtimes runs rough at low (around town) speeds like its missfiring
the laptop gave 3 specific codes misfires on pistons 2, 3 and 4
cant remember the codes (numbers) exactly
steve
BTW the car somtimes runs rough at low (around town) speeds like its missfiring
Last edited by Steve001; Feb 15, 2008 at 06:03 PM.
Trending Topics
Thread Starter
Scooby Regular
iTrader: (7)
Joined: Jan 2001
Posts: 3,695
Likes: 1
From: Chester (Tumbleweed City!)
cars are such a pain!!
things were so simple before ecu's
dont think its the new coil packs. whats the chance of all 4 being faulty???
hence the confusion (its prob just me
)
things were so simple before ecu's
dont think its the new coil packs. whats the chance of all 4 being faulty???
hence the confusion (its prob just me
)
just a thought as i did it years ago on a vectra{yawn} did the coilpacks go in nice and snug and not down the side of the plugs?? sound stupid but i did this years ago on 3 out of 4 bolted them up and got misfire on 3 cyls..
Thread Starter
Scooby Regular
iTrader: (7)
Joined: Jan 2001
Posts: 3,695
Likes: 1
From: Chester (Tumbleweed City!)
yeh nice an snug, its quite difficult or even impossible to get the rubber down the side of the plug. when i removed them i heard the suction pop as the rubber came off the plug.
s
s
Thread
Thread Starter
Forum
Replies
Last Post
hedgecutter
General Technical
3
Sep 25, 2015 02:35 PM



