Notices
Drivetrain Gearbox, Diffs & Driveshafts etc

To Link or not to Link, that is the question

Thread Tools
 
Search this Thread
 
Old Jan 18, 2002 | 03:59 PM
  #1  
Markus's Avatar
Markus
Thread Starter
Scooby Regular
25 Year Member
 
Joined: Mar 1999
Posts: 25,080
Likes: 0
From: The Great White North
Question

New wheels and new brakes should be fitted in near future, so that should help the ol blackbeast look and stop a bit better than it does now. The downpipe is giving a little more power, well, I think, and I will get it on the rollers at some point.

Now, after a little rest from modding, thus allowing, hopefully, a bit of cash to stockpile I'm going to be wanted to mod some more, and in my mind a logical 'next step' would be a mappable ECU, and, suprise, suprise, the first thing that pops into my mind is a Link ECU. (Motec and Pectal would be nice but mucho dosh, and too mucho dosh for me!)

I know I could just email BRD about this, and probably will, maybe, but thought i'd ask on here as I know many, many people have links, and rate them.

So, now, after the waffling, here's the point

What exactly would the link do for me? the car has HKS induction kit thingy (power flow filter type thing) BPM twindump downpipe and Apexi N1 center and backbox, thus it's cat free, so what benefits would a link give me?

more power? better torque range? other stuff?

I'm pretty sure that BRD can map the link to my requirements, but I'm not sure what my requirements would be (great huh!) more power? better torque (which I think is the real deal, big torque is good, if not better than big bhp)

Also, and I don;t know how many, if any have asked this before, but what disadvantages, if any, would there be to fitting a link. This is apart from me sacrificing more money to the altar of scooby tuning Warranty is not an issue as I don't have any. What about servicing? would my garage need to know anything special about the Link to service the car? I assume not.

What would other systems offer, eg Motec, Pectel, Unichip? Personaly I'd realy only go for a link, cos that's me


[Edited by Markus - 1/18/2002 4:03:28 PM]
Reply
Old Jan 18, 2002 | 04:37 PM
  #2  
lordlucan's Avatar
lordlucan
Scooby Regular
 
Joined: Feb 1999
Posts: 1,100
Likes: 0
Post

Marcus

Yes do it ....

When you are back in the U.K I will speak to you, as I received crap customer service from BRD I went another route, but I still have a link !!! Just alot cheaper.

Where there is a will there is a way.... Thanks Branco !!!!

Jase
Reply
Old Jan 18, 2002 | 05:07 PM
  #3  
JohnD's Avatar
JohnD
Scooby Regular
iTrader: (5)
 
Joined: Apr 2000
Posts: 6,252
Likes: 1
From: Havering, Essex
Exclamation

Jase
I`m having the link package fitted tomorrow (Sat.) Can you enlighten me as to what to expect from B.B. at Richmond? E-mail me?
Much appreciated - JohnD
Reply
Old Jan 18, 2002 | 05:29 PM
  #4  
ZAZ's Avatar
ZAZ
Scooby Regular
 
Joined: Feb 2001
Posts: 555
Likes: 0
From: Kent
Cool

Jase,

If your at the Woodman next Friday I wouldn't mind a chat about it, I'm thinking about adding a chip aswell!

Cheers
Scott
Reply
Old Jan 18, 2002 | 05:30 PM
  #5  
ZAZ's Avatar
ZAZ
Scooby Regular
 
Joined: Feb 2001
Posts: 555
Likes: 0
From: Kent
Cool

Jase,

If your at the Woodman next Friday I wouldn't mind a chat about it, I'm thinking about adding a chip aswell!

Cheers
Scott
Reply
Old Jan 18, 2002 | 05:37 PM
  #6  
lordlucan's Avatar
lordlucan
Scooby Regular
 
Joined: Feb 1999
Posts: 1,100
Likes: 0
Post

John D - Cant really answer that question as I probably caught Branco on an off day, i am sure he is a top bloke. As for Bob, he is a true gentleman in the Scooby world.
My original plan was to have a link fitted at BRD, oweing to a rude, abusive person who answered the phone I took an alternative route saving a few hundred in the process...

Zaz - talk soon.

Jase
Reply
Old Jan 18, 2002 | 05:50 PM
  #7  
catflap's Avatar
catflap
Scooby Regular
 
Joined: Sep 2001
Posts: 1,322
Likes: 0
Talking

The link is something m thinking of geting this year myself, and the thought of dealing with rood people turn me off like haivng my nackers caught in my zip

The thought of saving a few hundred quid also is appealing

How much didi you pay for the link? any chance of an e-mail about some info
Reply
Old Jan 18, 2002 | 05:52 PM
  #8  
Adam M's Avatar
Adam M
Scooby Regular
 
Joined: Aug 1999
Posts: 7,957
Likes: 0
Post

dont think you can say you caught on a bad day.

what you caught was branko!

couldnt agree more about bob though. A total gentleman and knows his stuff.

Markus.

the link is great, the newer chips really have improved, and with decent mapping (which bob and others can provide) will be unnoticable.

It will allow you to achieve almost 300bhp on standard injectors and more if you uprate to 440s.

it also allows you to achieve bettr fuel consumption by leaning out cruise zones and runnign more ignition.

You will probably find that your car due to its age has a buggered lambda sensor in which case the default setting will cause teh car to run rich for safety, meaning your fuel consumption is already very high.

You could have the car mapped for 95 if you want to save money too, at the expense of performance.

I wouldnt bother with the more expensive ecus. In terms of gains over a standard link the law of diminishing returns applies.

go for it, you wont regret it.

Email me offline if you have any questions and I will do my best to help you out. If I cant I will know a man who can. Dont assume branko will always be difficult, he isnt all bad and does know his stuff. other option is to speak to bob directly, he is always willing to help and has a way of explaining things that even an idiot like me can understand, or at least thats how it feels .
Reply
Old Jan 18, 2002 | 05:57 PM
  #9  
T-uk's Avatar
T-uk
Scooby Regular
 
Joined: Mar 2001
Posts: 1,998
Likes: 0
From: uk
Post

can the other more expensive ECU's not be used in other turbo cars though,which would be good for the sti7,EVO or what ever you get next.

[Edited by T-uk - 1/18/2002 5:59:38 PM]
Reply
Old Jan 18, 2002 | 05:59 PM
  #10  
Markus's Avatar
Markus
Thread Starter
Scooby Regular
25 Year Member
 
Joined: Mar 1999
Posts: 25,080
Likes: 0
From: The Great White North
Post

Thanks chaps.

Adam, fantastic info as usual.
Reply
Old Jan 18, 2002 | 06:03 PM
  #11  
lordlucan's Avatar
lordlucan
Scooby Regular
 
Joined: Feb 1999
Posts: 1,100
Likes: 0
Post

Sorry Catflap - top secret at the mo.

Jase
Reply
Old Jan 18, 2002 | 06:10 PM
  #12  
EvilBevel's Avatar
EvilBevel
Scooby Regular
 
Joined: Oct 1999
Posts: 3,491
Likes: 0
Post

I hate it when I agree 100 % with Adam - especially with his last paragraph

I don't have a Link myself, but I am convinced it's a very good option - if mapped by someone who knows what he is doing. IMHO Bob is indeed not only very generous with his info on this BBS, but is also considered a top Link mapper.

HTH,

Theo

PS: Lord, as you know, this is not meant to oppose your opinions in any way ..
Reply
Old Jan 18, 2002 | 06:13 PM
  #13  
lordlucan's Avatar
lordlucan
Scooby Regular
 
Joined: Feb 1999
Posts: 1,100
Likes: 0
Post

Evil - totally agree with you.
Reply
Old Jan 22, 2002 | 12:02 PM
  #14  
Adam M's Avatar
Adam M
Scooby Regular
 
Joined: Aug 1999
Posts: 7,957
Likes: 0
Post

Why is it so bad to agree with me?

I have been wrong, but I wouldn't say I was consistently bad.

Theo, we have agreed before, and no doubt will again. Deal with it.
Reply
Old Jan 22, 2002 | 01:47 PM
  #15  
Adam M's Avatar
Adam M
Scooby Regular
 
Joined: Aug 1999
Posts: 7,957
Likes: 0
Post

Look at this one!

its a record.

http://www.scoobynet.co.uk/bbs/threa...ThreadID=66667
Reply
Old Jan 22, 2002 | 03:09 PM
  #16  
EvilBevel's Avatar
EvilBevel
Scooby Regular
 
Joined: Oct 1999
Posts: 3,491
Likes: 0
Post

I agree with what you say on that thread too !

Guess I'll have to live with it indeed
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KAS35RSTI
Subaru
27
Nov 4, 2021 07:12 PM
SilverM3
ScoobyNet General
8
Feb 24, 2021 01:03 PM
south_scoob
ScoobyNet General
22
Oct 3, 2015 01:05 PM
Brzoza
Engine Management and ECU Remapping
1
Oct 2, 2015 05:26 PM
Ganz1983
Subaru
5
Oct 2, 2015 09:22 AM




All times are GMT +1. The time now is 09:11 AM.