How much power should I get with this upgrade?
I would like to know (roughly) what power my car could be running once fitted with the following, it’s a 2003 WRX with 3” de-cat straight through exhaust (currently producing 264 BHP and similar torque)
STI 8 Bottom End (2.0L)
VF34 Turbo
Uprated Injectors (700cc+?)
Uprated Fuel Pump
EcuTEK Remap
STI Cams, P1 Head, STI Valves
Decat Up-pipe
Exedie single plate race clutch, complete with flywheel
New K&N panel filter
Cheers all!
STI 8 Bottom End (2.0L)
VF34 Turbo
Uprated Injectors (700cc+?)
Uprated Fuel Pump
EcuTEK Remap
STI Cams, P1 Head, STI Valves
Decat Up-pipe
Exedie single plate race clutch, complete with flywheel
New K&N panel filter
Cheers all!
The bottom end, crank and rods are kaput on the car at the moment, just to get it back on the road is 2.5K, then there's all the hassle of selling, transfering private plates etc, and probably only get 10k for it, then can only afford another 3k to buy a newer car, and an sti is only running 280bhp with resonable mileage....
but then again!!! THIS IS MY DILEMA...
but then again!!! THIS IS MY DILEMA...
Trending Topics
talk to andy.f he did his 03 wrx project car to 378bhp can't remember total mods but was a tdo5 18g http://andyforrestperformance.co.uk/index2.html
i wouldn't bother with changing the heads \ cams unless you are going to fit a bigger turbo ( or plan in future )
my 02 wrx made 386 bhp on a roger clark turbo on std internals running 1.4 ish boost
simular spec P1's seem to make 400 + bhp running 1.5 bar boost with the same turbo
my 02 wrx made 386 bhp on a roger clark turbo on std internals running 1.4 ish boost
simular spec P1's seem to make 400 + bhp running 1.5 bar boost with the same turbo
Last edited by WRX_Rich; Aug 30, 2006 at 11:41 PM.
Originally Posted by WRX_Rich
i wouldn't bother with changing the heads \ cams unless you are going to fit a bigger turbo ( or plan in future )
all i can say is I have over 380 bhp on std wrx heads and cams,
have a chat to RCM, API, Zen and scooby clinic and compare prices etc they will not try and cheat you and be more than happy to explain
one day soon i will be in the same position as you and this will be my first step
have a chat to RCM, API, Zen and scooby clinic and compare prices etc they will not try and cheat you and be more than happy to explain
one day soon i will be in the same position as you and this will be my first step
Scooby Regular
Joined: Jul 2003
Posts: 5,734
Likes: 0
From: Behind the wheel of a Time Attack R33 GTR
Originally Posted by [MikeyB]
Rich, do you mean a bigger turbo than the TD05 20g?
I have a similar thing with my GT30, although my housing is larger than the P18. Hence capable of potentially more peak power, despite having a slightly smaller wheel than a GT35...but much bigger than the 20g (44lb/min for a 20g vs 55lb/min for my GT30)
Hope that makes sense.....
Im with rich on the dont bother changing cams/heads for this level though.
Neil I think Mikey ment do i think heads need replacing on a vf34 or 20g
but for the record my turbo is a gt35 p18 from RCM.... l doubt it is a garret 35wheel in there may be a 30, i don't think you could hybrid a 35 wheel with a p18... why they call it that i don't know
Mikey something you have missed off your list if your wanting to get close to 400 is a Front mount intercooler
but for the record my turbo is a gt35 p18 from RCM.... l doubt it is a garret 35wheel in there may be a 30, i don't think you could hybrid a 35 wheel with a p18... why they call it that i don't know
Mikey something you have missed off your list if your wanting to get close to 400 is a Front mount intercooler
Originally Posted by WRX_Rich
Neil I think Mikey ment do i think heads need replacing on a vf34 or 20g
but for the record my turbo is a gt35 p18 from RCM.... l doubt it is a garret 35wheel in there may be a 30, i don't think you could hybrid a 35 wheel with a p18... why they call it that i don't know
Mikey something you have missed off your list if your wanting to get close to 400 is a Front mount intercooler
but for the record my turbo is a gt35 p18 from RCM.... l doubt it is a garret 35wheel in there may be a 30, i don't think you could hybrid a 35 wheel with a p18... why they call it that i don't know
Mikey something you have missed off your list if your wanting to get close to 400 is a Front mount intercooler
Scooby Regular
Joined: Jul 2003
Posts: 5,734
Likes: 0
From: Behind the wheel of a Time Attack R33 GTR
but if you ditched the heads then you could
I dont think its worth upgrading those at this level again, as Rich has said, he gets 386 with standard UK heads, and im aiming to get around 420 with the exact same UK heads too....so if you chopped that cost off, how much would it then be?
I dont think its worth upgrading those at this level again, as Rich has said, he gets 386 with standard UK heads, and im aiming to get around 420 with the exact same UK heads too....so if you chopped that cost off, how much would it then be?
ok sounds fair enough
after being in a jdm 2 litre sti with a higher rev limmit i do see the advantages of replacing the heads but u may want to ask the question in the technical section
after being in a jdm 2 litre sti with a higher rev limmit i do see the advantages of replacing the heads but u may want to ask the question in the technical section
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM




