power loss since fitment of new back box
i know its not me for a start, but since fitting my wr sport oval back box it seems i have lost power and the power curve is not as smooth and i dont know why,especially the turbo kick seems to have lessened.
i have checked fitting of back box and that is fine
appreciate advice
mike
(previous box was std one)
i have checked fitting of back box and that is fine
appreciate advice
mike
(previous box was std one)
Mike
as no one else is taking you up on this one, I suggest an ECU reset by disconnecting your battery for 20 minutes then reconnecting, the ECU will learn your new set up faster.
However, most back boxes are more restrictive initially than they end up being. This because the packing shrinks, gets blown out, affected by heat etc etc. It may just need a few good blasts to settle down.
Good Luck
Beastie
as no one else is taking you up on this one, I suggest an ECU reset by disconnecting your battery for 20 minutes then reconnecting, the ECU will learn your new set up faster.
However, most back boxes are more restrictive initially than they end up being. This because the packing shrinks, gets blown out, affected by heat etc etc. It may just need a few good blasts to settle down.
Good Luck
Beastie
Mike doesnt say what MY. However Dr Evil is right if you have MY01 dont bother with the battery disconnect.
No it wont affect your alarm, although it will shriek briefly when you reconnect the battery.
Cheers
Beastie
No it wont affect your alarm, although it will shriek briefly when you reconnect the battery.
Cheers
Beastie
Thread
Thread Starter
Forum
Replies
Last Post
aaron_ions
General Technical
1
Sep 17, 2015 10:42 AM





