The garage fits my new flamer kit this afternoon. After I try several times, I cannot see the flame coming out my loud exhaust. Ask the mechanics, they said everything works properly butta still flame. I am just wondering is that any skill using when I push the pedal? Why is that and need gurus help.

Great thanks for reply

Scoobyhummel

 

Maybe your car is running a little lean so not enough unburnt fuel coming through, I've seen a few cars with these fitted and they were running rich to get a flame, something i wouldn't recommend. I don't know if they have to run slightly rich though.

 

Maybe try altering the plug gap? Mine worked fine straight away. You have to give it lots of revs then it should flame when you back off the accelerator. I assume you are decatted? A VTA dumpvalve helps too.

 

and they call neons on scoobs! lol

 

how to adjust lean to rich? i got de-cat exhaust and forge dump valve as well. eager to see the flame, but something always happened...

a few question i would like to answer. does the flame appear when back off the accelerator in the high rev or change the gears? can i see the flame i raise the rev when she stops? can someone leave me some piccies of ur flame?

cheers m8

scoobyhummel

 

LOL

 

come on guys!

 

Yes the flame appears when you change gear at high revs, and when you back off the throttle at high revs.

You can make it flame when revving from standing still, but only if you don't leave it idling for ages first, you have to have been driving around for a bit.

Here are some pics of mine:

 

Thank u very much m8!

one more question, will the flame burn the rear bumper a liitle bit?

cheers

scoobyhummel

 

It hasn't burnt mine yet and I've had it for a couple of months.

 

butta how can i sort out the lean to rich btw?

cheers

scoobyhummel

 

check out this video of tayside crimbo meet.
youll see my scoob flaming in action.well worth a look.

http://www.dymension.com/media/sm-28-12-03.mpg (right click and save)

edited to say, i get the best flames when i floor it and as i change gear pause in neutral for a second longer than normall,floor it again and i get 6-10ft flames.

 

Thanks a lot m8

just downloading the movie. hopefully it will flame today...

scoobyhummel

 

just saw the movie, brilliant m8

when can i get my flame out of the exhaust?...

scoobyhummel

 

i take it you have a full de-cat yes?you wont get flames with your cats on.
is the plug deffo sparking?are you booting it enough?
mine worked first time and i did it myself.

scott

 

In what way exactly does this thread qualify as "urgent"?

 

the guys desperate to get flames,think of all the cash hes spent,course its urgent